has anyone fitted one of these?

what i was thinking of doing was re-routing the pipes from the headlight washer jets to the 2 sprays mounted on the bonnet/scoop plate.

I have a PSI SECS monitor and should be able to set this up (somehow to automatically do the water injection) failing that i have the dash switch for auto i/c spray.


anyone who has done a similar sort of thing got any advice on what they did.

also any1 got a pic of their i/c sprays mounted on the plate

any other pics would be gr8ly appreciated.

cheers


p.s. I know i could use the washer jet button on the dash manually but would prefer it to work auto when on boost

 

I have made a homemade idea of an I/C sprayer and it works perfectly.

I have an import so i used the pipe and motor from the rear wash wipe, but headlight washers will obv do the same.

Then i created spray bar using thin metal pipe which i drilled and mounted on the inside of the intercool guard on the bottom of the bonnet.

Can get u pics across later if it helps.

Charlie

 

pics, yes please mate


cheers, fellow ESC boy