TD05-20G inlet size
24 August 2005, 10:18 AM
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Nov 2002
Posts: 449
Likes: 0
Received 0 Likes
on
0 Posts
TD05-20G inlet size
Can any one tell me the inlet diameter of the TD05-20G?
Does it need an oversize turbo inlet pipe or does the standard Samco / OEM job fit it.]
Cheers
dr_jones
Does it need an oversize turbo inlet pipe or does the standard Samco / OEM job fit it.]
Cheers
dr_jones
24 August 2005, 12:51 PM
#3
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Nov 2002
Posts: 449
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RON
I'm led to believe that the standard pipe should fit, i was told it might be a bit tight, so samco would be fine.....I guess..
25 August 2005, 07:29 AM
#4
The 'straight' inlet 20g is a bigger diameter, and the stretch to the stock (Sti v3 in my case) plastic/rubber inlet tube was too much for it and it split.
Ended up buying a Samco replacement from Roger Clark which is specially made for the 20g/MAF front entry installation.
Cost lot @ £230 but nearly fitted like a glove; the diameter to the MAF flex tube was very very tight.
Turbo end was perfect.
Available I think only in blue, could be wrong.
Graham.
Ended up buying a Samco replacement from Roger Clark which is specially made for the 20g/MAF front entry installation.
Cost lot @ £230 but nearly fitted like a glove; the diameter to the MAF flex tube was very very tight.
Turbo end was perfect.
Available I think only in blue, could be wrong.
Graham.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
