Rough BHP + Q's? Guestimates and help please!
#1
Scooby Regular
Thread Starter
Join Date: Aug 2004
Location: Bristol
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Rough BHP + Q's? Guestimates and help please!
Hi
My brother owns a STi 4 with a Full Blitz Nur Spec exhaust inc decat and it also has a Apexi cone filter/Induction kit. Other than this i beleive it is standard.
We think the boost is standard but are unsure - it overboosts to about 1.2 bar then drops down and holds 1bar all through the rev range. Is this standard?
Anyways he's had it looked at and told its a very strong/good example. We've had my g-tech meter in it before and had a 4.6 0-60 so not too bad as it was on 18's! What do people expect it to be pushing bhp wise?
The filter is new on the car and we beleive it has added power. Is this likely? Its an open filter running of the standard air feed.
Cheers
Tom
the engine in question:-
http://img163.echo.cx/img163/458/sisengine6ce.png
My brother owns a STi 4 with a Full Blitz Nur Spec exhaust inc decat and it also has a Apexi cone filter/Induction kit. Other than this i beleive it is standard.
We think the boost is standard but are unsure - it overboosts to about 1.2 bar then drops down and holds 1bar all through the rev range. Is this standard?
Anyways he's had it looked at and told its a very strong/good example. We've had my g-tech meter in it before and had a 4.6 0-60 so not too bad as it was on 18's! What do people expect it to be pushing bhp wise?
The filter is new on the car and we beleive it has added power. Is this likely? Its an open filter running of the standard air feed.
Cheers
Tom
the engine in question:-
http://img163.echo.cx/img163/458/sisengine6ce.png
#6
Scooby Regular
iTrader: (7)
Join Date: Mar 2004
Location: not sure
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
have a look on here
look on plate on passenger side strut top uder the bonnet.
http://www.sidc.co.uk/faq.htm#2.1.1
look on plate on passenger side strut top uder the bonnet.
http://www.sidc.co.uk/faq.htm#2.1.1
Trending Topics
#8
Scooby Regular
Join Date: May 2002
Location: 2005 sso, 1/4 finals,3rd in 60ft; 2004 sso,semi finals,2nd in 60ft time; 2003 standard car 2nd 60ft
Posts: 4,909
Likes: 0
Received 0 Likes
on
0 Posts
280 ish and thats with the decatif it was mapped in then i would go for 320ish
#10
Scooby Regular
Join Date: Jun 2002
Location: From Kent to Gloucestershire to Berkshire
Posts: 2,905
Likes: 0
Received 0 Likes
on
0 Posts
Depends on which rollers you take it to - take it North (Powerstation, Tewkesbury) he'd get 20-30bhp less than if he took it East (Power Engineering, Uxbridge). At PE, you might well see 300 on a good day, much less likely you would at PS.
PS Is he aware of the "local" website - www.scoobyzone.co.uk - plenty going on in the Bristol area on there
PS Is he aware of the "local" website - www.scoobyzone.co.uk - plenty going on in the Bristol area on there
Thread
Thread Starter
Forum
Replies
Last Post