Hayward & Scott celfix wiring
Thread Starter
Scooby Newbie
Joined: Feb 2004
Posts: 27
Likes: 0
Hayward & Scott celfix wiring
Ok, so I have fitted a complete H&S exhaust and the enclosed celfix. However, my wiring diagram does not really match the wiring of my car.
It reads:
1) Locate 135 pin 17
2) Cut pin 17 wire
3) Solder Cel Fix blue wire to pin 17 wire
5) Join remaining blue cel fix wire to other remaining blue cut wire
6) Insulate all joins
Meaning that no 4) is missing. Anyway, on the diagram I see that the line missing must be "4) Solder Cel Fix red wire to pin 19 wire".
However, my MY03 has a green wire, not a blue one. I cut the green one, but if can't be the right one as I still get the CEL when I start the engine.
My wiring diagram reads "Version 8 Impreza Turbos - Xtreme Scoobies limited". Is this the correct diagram for my car? Has anyone with a 03-04 blobeye installed a H&S celfix?
It reads:
1) Locate 135 pin 17
2) Cut pin 17 wire
3) Solder Cel Fix blue wire to pin 17 wire
5) Join remaining blue cel fix wire to other remaining blue cut wire
6) Insulate all joins
Meaning that no 4) is missing. Anyway, on the diagram I see that the line missing must be "4) Solder Cel Fix red wire to pin 19 wire".
However, my MY03 has a green wire, not a blue one. I cut the green one, but if can't be the right one as I still get the CEL when I start the engine.
My wiring diagram reads "Version 8 Impreza Turbos - Xtreme Scoobies limited". Is this the correct diagram for my car? Has anyone with a 03-04 blobeye installed a H&S celfix?
Scooby Regular
Joined: Aug 2002
Posts: 427
Likes: 0
Originally Posted by spooz
Ok, so I have fitted a complete H&S exhaust and the enclosed celfix. However, my wiring diagram does not really match the wiring of my car.
It reads:
1) Locate 135 pin 17
2) Cut pin 17 wire
3) Solder Cel Fix blue wire to pin 17 wire
5) Join remaining blue cel fix wire to other remaining blue cut wire
6) Insulate all joins
Meaning that no 4) is missing. Anyway, on the diagram I see that the line missing must be "4) Solder Cel Fix red wire to pin 19 wire".
However, my MY03 has a green wire, not a blue one. I cut the green one, but if can't be the right one as I still get the CEL when I start the engine.
My wiring diagram reads "Version 8 Impreza Turbos - Xtreme Scoobies limited". Is this the correct diagram for my car? Has anyone with a 03-04 blobeye installed a H&S celfix?
It reads:
1) Locate 135 pin 17
2) Cut pin 17 wire
3) Solder Cel Fix blue wire to pin 17 wire
5) Join remaining blue cel fix wire to other remaining blue cut wire
6) Insulate all joins
Meaning that no 4) is missing. Anyway, on the diagram I see that the line missing must be "4) Solder Cel Fix red wire to pin 19 wire".
However, my MY03 has a green wire, not a blue one. I cut the green one, but if can't be the right one as I still get the CEL when I start the engine.
My wiring diagram reads "Version 8 Impreza Turbos - Xtreme Scoobies limited". Is this the correct diagram for my car? Has anyone with a 03-04 blobeye installed a H&S celfix?
Ian
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM
