Differences in inlet manifolds?
Scooby Regular
Joined: Nov 2001
Posts: 15,239
Likes: 1
From: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
No difference
92 -96 are same 97 -98 will fit 92 -96 and vice versa but the throttlebody / tps is different.
92 -96 are same 97 -98 will fit 92 -96 and vice versa but the throttlebody / tps is different.
Originally Posted by robertgraham
So a sti4 manifold coversion with FE turbo would be relatively straight foward? 

BVM.... Tell me about those early cars sucking

Tony.
Trending Topics
Hi
Im doing the same upgrade at moment..i have a 95-96 wrx with a Z4 ecu .
I have a manifold off a 98 wrx but TPS has only 3 wires on it and original has 4 .
How do i get round this ? is the 4th wire the idle position sensor as looked on wiring diagrams and the only difference i can see between the early and later models is that ealry ones list a idle position sensor .
Are the outputs the same on the TPS ?
Also do i just put original wiring off old manifold onto later one ?
Another other probs to look out for ?
Im doing this so can fit later TMIC and in the future fit front entry turbo .
Many Thanks
Karl
Im doing the same upgrade at moment..i have a 95-96 wrx with a Z4 ecu .
I have a manifold off a 98 wrx but TPS has only 3 wires on it and original has 4 .
How do i get round this ? is the 4th wire the idle position sensor as looked on wiring diagrams and the only difference i can see between the early and later models is that ealry ones list a idle position sensor .
Are the outputs the same on the TPS ?
Also do i just put original wiring off old manifold onto later one ?
Another other probs to look out for ?
Im doing this so can fit later TMIC and in the future fit front entry turbo .
Many Thanks
Karl
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM



