ecu pinout for my00
#1
ecu pinout for my00
badly need an ecu pinout for turbo my00 uk. trying to set up throtle pos sensor. i have the workshop manual but it doesnt have the picture of the plugs. NOTHING on ravensblade all older cars.
ps. 3 plugs none of which are yellow,4 pins high.
many thanks in advance
ps. 3 plugs none of which are yellow,4 pins high.
many thanks in advance
#2
Scooby Regular
iTrader: (9)
I have 99 email me if its any good to you
Originally Posted by burty
badly need an ecu pinout for turbo my00 uk. trying to set up throtle pos sensor. i have the workshop manual but it doesnt have the picture of the plugs. NOTHING on ravensblade all older cars.
ps. 3 plugs none of which are yellow,4 pins high.
many thanks in advance
ps. 3 plugs none of which are yellow,4 pins high.
many thanks in advance
#5
Scooby Regular
Join Date: Apr 2002
Location: Bournemouth - 5x Ex Impreza owner. 997 GT3 CS.
Posts: 7,333
Likes: 0
Received 0 Likes
on
0 Posts
Seem to remember setting mine up on Ohms from the pins on the TPS with the plugs out. Middle as ground and passenger side pin as signal.
Either that or B136 at the ECU (blue plug) pin 20 is signal, pin 24 is ground. Closed is 0.5v +/- 0.3 open is 4.3 +/- 0.3 volts.
20 is 3rd row down, 2nd pin in. This side of the plug has 4 pins then a divide in the middle, then 3 pins on the other side. Pin 24 is the middle of the 3 pins on the other side of the divide.
19 20 21 22 === 23 24 25
MB
Either that or B136 at the ECU (blue plug) pin 20 is signal, pin 24 is ground. Closed is 0.5v +/- 0.3 open is 4.3 +/- 0.3 volts.
20 is 3rd row down, 2nd pin in. This side of the plug has 4 pins then a divide in the middle, then 3 pins on the other side. Pin 24 is the middle of the 3 pins on the other side of the divide.
19 20 21 22 === 23 24 25
MB
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM