Notices

Safe boost pressure level for Sti V

Thread Tools
 
Search this Thread
 
Old 12 January 2005, 03:04 PM
  #1  
STI VI
Scooby Regular
Thread Starter
 
STI VI's Avatar
 
Join Date: Jan 2005
Posts: 308
Received 1 Like on 1 Post
Default Safe boost pressure level for Sti V

Guys,

Sure this has been asked before......... I have just purchsed a Blitz ID3 SBC sequential boost control for my STI 5, which is running a Front pipe and HKS Silent Hi Power exhaust and Sti Air Filter. I would like to know the safe amount of boost pressure. I have been informed by the installer that 1.1bar is ok but 1.2bar may be too much, any advice? I am carefully monitoring my Defi boost gauge to make sure I don't over boost. The standard car was close to 1.3bar but only peaked, Using a boost controller it would hold the higher pressure and may cause problems?

Cheers
Old 12 January 2005, 09:54 PM
  #2  
Blind Side
Scooby Regular
 
Blind Side's Avatar
 
Join Date: Sep 2001
Posts: 175
Likes: 0
Received 0 Likes on 0 Posts
Default

The advice you have been given by the installer is pretty good; you do not want to peak over 1.25 - 1.3 bar on stock engine internals and should be able to level out at 1 -1.1 bar. Also it always pays to use a good octane booster and super unleaded and a install a knock link if you plan to run consistantly (artificially?) high boost levels. Should be a nice toy!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM



Quick Reply: Safe boost pressure level for Sti V



All times are GMT +1. The time now is 09:18 PM.