PRODRIVE ECU FAULT.
#1
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: May 2003
Location: from a zakspeed fiesta to a PPP'd sti8 in lincs
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
PRODRIVE ECU FAULT.
I've now found out,thx to eddieh ,that the prodrive ecu i have runs his car but wont tick over so ya have to rev it constantly. it is showing "error code 24" which im told is the idle control valve so im guessing the ecu has a fault as this is exactly how it ran my old car. Is this a fault worth getting looked at, if so by whom or shall i skip it.
any help much appreciated.
Andy
any help much appreciated.
Andy
#2
Scooby Regular
Join Date: Apr 2002
Location: Bournemouth - 5x Ex Impreza owner. 997 GT3 CS.
Posts: 7,333
Likes: 0
Received 0 Likes
on
0 Posts
What MY is it?
Just to clarify, you've swapped your mates ECU with a Prodrive on, and the Prodrive one won't let it idle? You need to reset it to as it will have memorised the settings from the last car it was on, as all cars vary slightly in terms of sensor outputs etc... Either that or you have unmasked a genuine fault on the car.
MB
Just to clarify, you've swapped your mates ECU with a Prodrive on, and the Prodrive one won't let it idle? You need to reset it to as it will have memorised the settings from the last car it was on, as all cars vary slightly in terms of sensor outputs etc... Either that or you have unmasked a genuine fault on the car.
MB
#3
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: May 2003
Location: from a zakspeed fiesta to a PPP'd sti8 in lincs
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
hi mark,
its off a MY99 http://bbs.scoobynet.co.uk/showthread.php?t=391348 .
he reset the ecu and it still showed the error code.when i tried it on mine ages ago it wouldnt run, exactly the same as his wont unless ya rev it. ive an old thread somewhere all about it ill dig it out.
its off a MY99 http://bbs.scoobynet.co.uk/showthread.php?t=391348 .
he reset the ecu and it still showed the error code.when i tried it on mine ages ago it wouldnt run, exactly the same as his wont unless ya rev it. ive an old thread somewhere all about it ill dig it out.
#5
Scooby Regular
Join Date: Apr 2002
Location: Bournemouth - 5x Ex Impreza owner. 997 GT3 CS.
Posts: 7,333
Likes: 0
Received 0 Likes
on
0 Posts
Hmm, not sure.
Very surprised that a Prodrive ECU from a MY99 has an STi badge on it.... although ive never seen one in the flesh. Are you sure it came from an RB5?
MB
Very surprised that a Prodrive ECU from a MY99 has an STi badge on it.... although ive never seen one in the flesh. Are you sure it came from an RB5?
MB
#7
Scooby Regular
Join Date: Apr 2002
Location: Bournemouth - 5x Ex Impreza owner. 997 GT3 CS.
Posts: 7,333
Likes: 0
Received 0 Likes
on
0 Posts
Ah
Then I am stumped! ISCV faults can occur as the result of a failed MAF / 02 as they try and correct the idle fault, but gives a value outside the expected, thus giving the fault. At least ive seen it on my last STi...
MB
Then I am stumped! ISCV faults can occur as the result of a failed MAF / 02 as they try and correct the idle fault, but gives a value outside the expected, thus giving the fault. At least ive seen it on my last STi...
MB
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM