intake resonator box
Scooby Regular
Joined: Dec 2002
Posts: 1,986
Likes: 0
From: Southampton*** MY02 STi, Black/Blue Mica Prodrive Style, mildly modded :) :). ***
Neilo,
See here: http://bbs.scoobynet.co.uk/showthread.php?t=362481
anyway, I did this mod about 6 weeks ago.
Fairly simple to do. The box does need to be pulled very hard to get it to come out.
Once out you need to plug the huge gap that you will have between the airbox and the wing, and also the ram air scoop needs extending too.
The above link was very helpful, also looked at the USA links to.
Mark
See here: http://bbs.scoobynet.co.uk/showthread.php?t=362481
anyway, I did this mod about 6 weeks ago.
Fairly simple to do. The box does need to be pulled very hard to get it to come out.
Once out you need to plug the huge gap that you will have between the airbox and the wing, and also the ram air scoop needs extending too.
The above link was very helpful, also looked at the USA links to.
Mark
Hi Neil,
I did this with my old car and used 90 deg & 45 deg grey drainpipe (3 inch?) sections to plug that gap to the wing and suck air from inside the wing.
Intake is high enough to stop water being sucked in.
It was certainly much noisier than std.
I did this with my old car and used 90 deg & 45 deg grey drainpipe (3 inch?) sections to plug that gap to the wing and suck air from inside the wing.
Intake is high enough to stop water being sucked in.
It was certainly much noisier than std.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM
