Fitting SX Regulator? Advice please
29 September 2004, 12:28 PM
#1
Fitting SX Regulator? Advice please
Hi All.
I have just got an SX Fuel regulator(15404 no gauge hole)
How and where do I fit it?
Should I wait until I have fitted the Walbro pump?
Car is an STI 5 Type R.
Thanks for Advice.
Mark
I have just got an SX Fuel regulator(15404 no gauge hole)
How and where do I fit it?
Should I wait until I have fitted the Walbro pump?
Car is an STI 5 Type R.
Thanks for Advice.
Mark
Last edited by Power Junkie; 29 September 2004 at 03:08 PM.
29 September 2004, 01:35 PM
#2
Scooby Regular
Join Date: Jul 2000
Location: Lancashire
Posts: 2,209
Likes: 0
Received 0 Likes
on
0 Posts
Is the fuel system currently std?
If so you will need to replace the existing OEM FPR with a fuel rail adaptor (FSE can supply them) and then plumb the SX in the fuel return line to the tank.
If you are unsure about doing this then don't try it yourself.
Andrew...
If so you will need to replace the existing OEM FPR with a fuel rail adaptor (FSE can supply them) and then plumb the SX in the fuel return line to the tank.
If you are unsure about doing this then don't try it yourself.
Andrew...
Thread
Thread Starter
Forum
Replies
Last Post
Reshard1977
General Technical
9
18 September 2015 08:58 PM