Samco hoses What else do I need?
#1
Scooby Senior
Thread Starter
iTrader: (1)
Join Date: Nov 2000
Location: Wildberg, Germany/Reading, UK
Posts: 9,706
Likes: 0
Received 73 Likes
on
54 Posts
Samco hoses What else do I need?
Ok I have fitted the intercooler T hose and the one from the intercooler to the inlet manifold, I have fitted the coolant hoses, but had 2 left over couldn't find where they went, one is sort of Z shaped and has 218 stamped on it and the other is about 4 inches long and has no markings on it.
Any help with where these go would be apreciated, I also noticed taht you don't get all the water hoses, I have the big one on the bottom right of the rad that goes to a silver thing under the engine that also has 2 other L shape rubber hoses coming out of it why did I not get all the Samco hoses to do the job.
Also the engine bay stills looks pretty lame as there are still so many black hoses on the right hand side of the engine for AC and stuff.
Someone mentioned getting ancilarry hoses, what are these?
Can I get samco hoses for the Heater matrix and the Dump valve etc
I noticed that when I took off the intercooler there are 2 black rubber hoses that are on the same line to the dump valve can I replace these with blue samcos?
Also there is supposed to be a samco hose that goes to the brake cylinder with a valve in it can I get one of these if so where?
Cheers
Steve
Any help with where these go would be apreciated, I also noticed taht you don't get all the water hoses, I have the big one on the bottom right of the rad that goes to a silver thing under the engine that also has 2 other L shape rubber hoses coming out of it why did I not get all the Samco hoses to do the job.
Also the engine bay stills looks pretty lame as there are still so many black hoses on the right hand side of the engine for AC and stuff.
Someone mentioned getting ancilarry hoses, what are these?
Can I get samco hoses for the Heater matrix and the Dump valve etc
I noticed that when I took off the intercooler there are 2 black rubber hoses that are on the same line to the dump valve can I replace these with blue samcos?
Also there is supposed to be a samco hose that goes to the brake cylinder with a valve in it can I get one of these if so where?
Cheers
Steve
#3
Scooby Regular
Join Date: Feb 2003
Location: CHIPP'N HAM
Posts: 3,931
Likes: 0
Received 0 Likes
on
0 Posts
Wurzel,
Thought the general census was that the hose from the brake cylinder was best left alone, or remove the existing valve from it and fit into new Samco hose.
Thought the general census was that the hose from the brake cylinder was best left alone, or remove the existing valve from it and fit into new Samco hose.
Thread
Thread Starter
Forum
Replies
Last Post
Pro-Line Motorsport
Car Parts For Sale
2
29 September 2015 07:36 PM
Flat4x4-again
General Technical
2
29 September 2015 06:32 PM