Please Help
#1
Scooby Regular
Thread Starter
Join Date: Feb 2002
Location: Sunny Dorset
Posts: 1,077
Likes: 0
Received 0 Likes
on
0 Posts
Please Help
I've just fitted a set of Bosch coil packs to my 93wrx, they are the ones that require the use of a HT lead.
All four have been fitted and are plugged in.....but now the car wont start
While fitting the coil packs I also carried out the infamous earthing mod.
When I turn the ignition on I get the oil and battery lights, but dont get the engine check light or the cat?? light. The engine turns over but wont fire.
The fuel pump doesnt prime, there are no error readings on the ecu, and am also unable to reset the ecu.
The car was running before coilpacksetc were changed??
Any ideas??
Mike
#4
Scooby Regular
Thread Starter
Join Date: Feb 2002
Location: Sunny Dorset
Posts: 1,077
Likes: 0
Received 0 Likes
on
0 Posts
Fuses have been checked, all ok............eventually found the problem, loose wire on ecu......sorted it
now it runs like a bag of poo
I've double checked they are connected to the right cylinder (swapped around )
Checked all the HT leads are secure.........seem to be
Anything else it could be........
Mike
now it runs like a bag of poo
I've double checked they are connected to the right cylinder (swapped around )
Checked all the HT leads are secure.........seem to be
Anything else it could be........
Mike
#5
Scooby Regular
Join Date: Sep 2000
Location: Deepest Darkest Dorset!!
Posts: 10,011
Likes: 0
Received 1 Like
on
1 Post
Hi Mike,
did you disconnect anything when you fitted the eath leads?
Not that i really knlow what it could be, but maybe something simple that just happened to get left off??
Ron.
did you disconnect anything when you fitted the eath leads?
Not that i really knlow what it could be, but maybe something simple that just happened to get left off??
Ron.