hey guys, need a little bit of help. i have the following coming:
560cc STi injectors
Walboro Fuel Pump
and a FPR

now i havent looked at any of these yet on the car, but idealy i would like to fit this myself as I have fitted all other mods myself. the car is a bugeyed WRX and some instructions on how to fit all of the above and in what order would be extremely helpful. thanks a lot

ScoobyDoo69

 

some usefull stuff here

fitting guide

I've just done mine , here's a coupla tips :

the 2 cross head bolts holding on the original fpr are a B!tch to get out - give them a good soaking with wd40 overnight first.
get some proper bolts to go back in their place - m5 i think.

the original fuel pipe that connects to it will probably be about half an inch too short !
be prepared to change it

be careful fitting the part that repalces the original fpr, it has a rubber o ring on it that breaks easily !

you'll be relieved to know that the fuel pump is easy to change