Big Fright this mornin'
#1
Scooby Regular
Thread Starter
Join Date: Jan 2002
Location: The Land of the Great and the Good
Posts: 715
Likes: 0
Received 0 Likes
on
0 Posts
Big Fright this mornin'
Starting from cold this morning ,for the first time I got a horrendous(sp)metallic tappet noise. After about 4 miles tic tic tic noise gone,obviously I've read on here they are prone to a lot of noise on cold starting but mine's has started very suddenly,car's been in the garage since last Thursday .
Its due an oil change hopefully this goes someway of dulling the noise a bit.
Any tips on best oil, cars a '95 WRX done about 60k
Colin
Its due an oil change hopefully this goes someway of dulling the noise a bit.
Any tips on best oil, cars a '95 WRX done about 60k
Colin
#3
Scooby Regular
iTrader: (5)
In a '95 you'll have hydraulic valve lifters, so a bit of tapping is possible after a few days lay-up, but should go quite quickly. If they're original and you've done a fair mileage, they could soon be up for replacement.
You have to be a bit wary of too thick an oil with hydraulic lifters, they'll take a little longer to pressurise and on some examples have been known to pump-up, stopping the valve from fully closing at high revs., although I'm not sure if this applies to Subaru items.
JohnD
You have to be a bit wary of too thick an oil with hydraulic lifters, they'll take a little longer to pressurise and on some examples have been known to pump-up, stopping the valve from fully closing at high revs., although I'm not sure if this applies to Subaru items.
JohnD
Thread
Thread Starter
Forum
Replies
Last Post
MightyArsenal
Wheels, Tyres & Brakes
6
25 September 2015 08:31 PM