BlitZ Power Meter I-D
16 June 2004, 03:55 PM
#3
Hmm....Seems no one knwo how to fit a Blitz ID Meter or has one!! which i find little hard to belive...
Blitz charge £15 for a manual....have found a link that may be of some use..
http://home.no.net/blown/stealth/power_meter.htm
Sam
Blitz charge £15 for a manual....have found a link that may be of some use..
http://home.no.net/blown/stealth/power_meter.htm
Sam
Last edited by SamUK; 16 June 2004 at 04:06 PM.
18 June 2004, 09:39 PM
#5
Scooby Regular
Join Date: Sep 2003
Location: Ireland
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
Fitting
Hi, if you can get any manual that shows you your ecu's wiring than you can use it to fit the power meter as it's only a couple of wires and it tells you what each one is for, ie if the black one is speed then find the speed wire on the ecu.
God i'm cr*p at explaining things
Cheers
John.
P.S i"ll try to find the diagram i used to fit mine.
God i'm cr*p at explaining things
Cheers
John.
P.S i"ll try to find the diagram i used to fit mine.
20 June 2004, 09:26 PM
#7
Can someone please point me in the right direction....
Quote:
You should be able to get an ECU print out from any dealer. It will show which wires on the ECU harness are which.
You need to tap into just 3 of them. only three wires: Power, Ground and a feed from the ECU that gives speed. Then all you need to find is the speed signal wire.
Where do i find the ECU...and the cables for the above...
Sam
Quote:
You should be able to get an ECU print out from any dealer. It will show which wires on the ECU harness are which.
You need to tap into just 3 of them. only three wires: Power, Ground and a feed from the ECU that gives speed. Then all you need to find is the speed signal wire.
Where do i find the ECU...and the cables for the above...
Sam
Thread
Thread Starter
Forum
Replies
Last Post
crazyspeedfreakz
Wanted
17
05 October 2015 07:19 PM
