can anyone tell me where i can locate the brass resrictor that runs from the boost solanoid ive been having overboost problems and ive been told that boring out the restrictor will cure the problem

 

Hose fitted on turbo outlet and going to westgate.Or near the T piece .
Try carby jet for bigger bore .

 

were exactly is it im a bit of a spud ive had a look but could not find it

 

If you search by hands the small hose that goes from turbo exit to the "T" piece before wastegate and solenoid you'll see inside the small brass restrictor.
You can use though a flow control valve from Festo, much better boost control and adjustability. I am going to order some valves from them (my choice is the valve with part code 151216) for me and some friends with standard or modified WRXs but unfortunately I can't find the part code for the hosetails(3,5mm inside diameter) that bolt to the valve, John Banks are you there?
Anyone else that bought in the past the above valve can help me?
JIM

 

standard pipe threads m8 any pneumatic factor should have them
try rs componants
richie