Knocklink fitting?
18 February 2004, 10:26 AM
#2
Scooby Regular
iTrader: (7)
Join Date: Aug 2002
Location: Lancashire & District Subaru
Posts: 2,989
Likes: 0
Received 0 Likes
on
0 Posts
What model of car ?
Generally - you have to bolt the sensor to the top of the engine then run the sensor cable through the bulkhead.
Connect it to the display then find power for the display (back of cig lighter, radio etc)
I helped my mate fit his to a STI 5 - we found removing the intercooler the easiest way, as the connection point for the sensor is a bu**er to get to.
Easy DIY job if your OK with a spanner.
Took us a couple of hours but would take us no more than 30 mins now we know what we are doing.
Chris
Generally - you have to bolt the sensor to the top of the engine then run the sensor cable through the bulkhead.
Connect it to the display then find power for the display (back of cig lighter, radio etc)
I helped my mate fit his to a STI 5 - we found removing the intercooler the easiest way, as the connection point for the sensor is a bu**er to get to.
Easy DIY job if your OK with a spanner.
Took us a couple of hours but would take us no more than 30 mins now we know what we are doing.
Chris
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
blockhead
Subaru Parts
19
07 November 2015 11:50 PM
matt12
Engine Management and ECU Remapping
4
14 September 2015 09:36 AM