Notices
General Technical
Sponsored by:
Sponsored by: CARiD

Urgent MY98 AFR wiring question.

Thread Tools
 
Search this Thread
 
Old Feb 6, 2004 | 12:23 PM
  #1  
Dark Blue Mark's Avatar
Dark Blue Mark
Thread Starter
Scooby Regular
 
Joined: Apr 2002
Posts: 7,333
Likes: 0
From: Bournemouth - 5x Ex Impreza owner. 997 GT3 CS.
Smile Urgent MY98 AFR wiring question.

On a MY98 ECU, Its block 136 pin no 5.

Presume the STi ECU is the same as a UK?

Pin 5 on mine is a black wire with silver stipes on it. Doesn't look like the right one to me, looks like an earth sort of wire (same as the ECU main earth)

Can anyone confirm this is the right one? Im used to wiring MY99's

MB
Reply
Old Feb 6, 2004 | 12:28 PM
  #2  
bruce's Avatar
bruce
Scooby Regular
iTrader: (5)
 
Joined: May 2000
Posts: 1,002
Likes: 0
Thumbs up

Originally Posted by Dark Blue Mark
On a MY98 ECU, Its block 136 pin no 5.

Presume the STi ECU is the same as a UK?

Pin 5 on mine is a black wire with silver stipes on it. Doesn't look like the right one to me, looks like an earth sort of wire (same as the ECU main earth)

Can anyone confirm this is the right one? Im used to wiring MY99's

MB
this is the diagram I used for my MY97WRX http://homepage.ntlworld.com/b.ruces...7ecupinout.jpg
Reply
Old Feb 6, 2004 | 12:31 PM
  #3  
Dark Blue Mark's Avatar
Dark Blue Mark
Thread Starter
Scooby Regular
 
Joined: Apr 2002
Posts: 7,333
Likes: 0
From: Bournemouth - 5x Ex Impreza owner. 997 GT3 CS.
Default

Cheers Bruce, same one im using.

Ill cut it and see

Thats looking into the mouth of the plug right?

MB
Reply
Old Feb 6, 2004 | 12:38 PM
  #4  
willgill's Avatar
willgill
Scooby Regular
iTrader: (1)
 
Joined: Oct 2002
Posts: 553
Likes: 0
From: London
Default

bear in mind the oxygen sensor needs to be warmed up to give a proper reading!!

don't give up if the reading looks like a standard 5v+ reading
Reply
Old Feb 6, 2004 | 12:42 PM
  #5  
markwild's Avatar
markwild
Scooby Regular
 
Joined: Oct 2002
Posts: 2,046
Likes: 0
From: North Staffs. UK
Default

MB - I needed to return the earth on mine back to the ECU as well - I originally took it to the battery post, but I could get the LEDS to flick from blue to green at WOT by using the rear screen heater switch !

Tried the earth post next to the ECU and it was almost as bad, so took both feeds from ECU wires directly.....

Let me know if you don't get it sorted and I'll take mine apart for a looksee - but it'll be tomorrow when I get chance....

Mark
Reply
Old Feb 6, 2004 | 12:53 PM
  #6  
Dark Blue Mark's Avatar
Dark Blue Mark
Thread Starter
Scooby Regular
 
Joined: Apr 2002
Posts: 7,333
Likes: 0
From: Bournemouth - 5x Ex Impreza owner. 997 GT3 CS.
Default

Cheers Will, aware of the delay Can catch people out!

Hi Mark, I normally use the ECU live and earth, as that is what the sensor is actually seeing.

Ill see how I get on, ta for the offer.

Ravensblade reckons it should be a white wire for the 02 signal...

MB
Reply
Old Feb 6, 2004 | 01:23 PM
  #7  
dowser's Avatar
dowser
Scooby Senior
20 Year Member
 
Joined: Oct 2000
Posts: 3,105
Likes: 0
From: Zurich, Switzerland
Default

Um - is this a Lambdalink? If so, it has two 'ground' wires - one an earth for the power line, and one an eart for the signal line. The ECU has two inputs from OE lambda sensor; signal and signal ground. Use them (but not for the power!)

I guess if it's not a Lambdalink then it's possible they only use one earth? If so, battery would be the best point to locate it.

Richard
Reply
Old Feb 6, 2004 | 02:03 PM
  #8  
Dark Blue Mark's Avatar
Dark Blue Mark
Thread Starter
Scooby Regular
 
Joined: Apr 2002
Posts: 7,333
Likes: 0
From: Bournemouth - 5x Ex Impreza owner. 997 GT3 CS.
Default

Richard,

Its an Autometer. 12v live, earth and signal.

Just about to hook it up.

From that diagram im using 13 as the earth, but not sure on the 12v live.

No 10 must be the one, switched ignition.

MB

Last edited by Dark Blue Mark; Feb 6, 2004 at 02:10 PM.
Reply
Old Feb 6, 2004 | 04:38 PM
  #9  
Dark Blue Mark's Avatar
Dark Blue Mark
Thread Starter
Scooby Regular
 
Joined: Apr 2002
Posts: 7,333
Likes: 0
From: Bournemouth - 5x Ex Impreza owner. 997 GT3 CS.
Default

Ok,

Tried different Earth / Live combinations, with the same signal wire (no5 black / green) and still no joy.

The AFR flickers when the engine fires then goes completely blank. Took the car out for 10 mins and nothing.

If I have the right signal wire, then my 02 sensor is completely shot. Just need to confirm I have the right signal wire...

£120 here we come.

MB
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JimBowen
ICE
5
Jul 2, 2023 01:54 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM
T.K
General Technical
10
Oct 2, 2015 11:35 AM
mistermexican
General Technical
2
Oct 1, 2015 04:30 PM




All times are GMT +1. The time now is 12:02 AM.