Apexi AVC-R
24 January 2004, 05:26 PM
#1
Scooby Newbie
Thread Starter
Join Date: Jan 2004
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I currenty invested in an Apexi Boost Control control unit, i decided to try fitting it myself as i have some technical background, the instructions seemed self explanetary.
The Unit is now plumbed in, everything inside the cabin works, i.e Boost pressure, Revs. BUT under the engine bay i am struggling to work out which pipes i should put coming to and from the solonid valve.
The vehicle has an 1995 EJ20 engine in it
Help would be appreciated
Craig
The Unit is now plumbed in, everything inside the cabin works, i.e Boost pressure, Revs. BUT under the engine bay i am struggling to work out which pipes i should put coming to and from the solonid valve.
The vehicle has an 1995 EJ20 engine in it
Help would be appreciated
Craig
24 January 2004, 11:17 PM
#2
Subaru Tuning Specialist
Join Date: Jun 2002
Location: 7.74 @179 mph 1/4 mile - road legal
Posts: 6,654
Likes: 0
Received 1 Like
on
1 Post
The pipe to the Apexi solenoid (supply) will be the one which is leading from the middle top area of the engine manifold over to the drivers side wing and on to a gold/black solenoid valve.
Remove the pipe from the gold/black valve and plug it in to the apexi.
The apexi solenoid outlet pipe is the one leading from gold/black sol valve to the actuator on the turbo. Unplug from original solenoid and plug into apexi.
Easier if someone can post a pic for you with the pipes marked ?
Andy
Andy
Remove the pipe from the gold/black valve and plug it in to the apexi.
The apexi solenoid outlet pipe is the one leading from gold/black sol valve to the actuator on the turbo. Unplug from original solenoid and plug into apexi.
Easier if someone can post a pic for you with the pipes marked ?
Andy
Andy
Thread
Thread Starter
Forum
Replies
Last Post
Mister:E
Subaru Parts
2
24 September 2015 01:37 PM