Notices

MY01 WRX PPP exhaust on to an STI7

Thread Tools
 
Search this Thread
 
Old 10 December 2003, 04:14 PM
  #1  
Silvafox
Scooby Regular
Thread Starter
iTrader: (1)
 
Silvafox's Avatar
 
Join Date: Sep 2003
Location: Nottingham
Posts: 835
Likes: 0
Received 0 Likes on 0 Posts
Post

Will a decat pipe, centre section and backbox from a PPP MY01 WRX fit on to my STI7? I assume they are the same connections and diameter etc?
Old 10 December 2003, 04:22 PM
  #2  
PPPMAT
Scooby Regular
 
PPPMAT's Avatar
 
Join Date: Dec 2002
Posts: 362
Likes: 0
Received 0 Likes on 0 Posts
Post

Hello Mate.

Can't speak for the centre section but the PPP backbox for WRX MY01 is the one thats on mine so that definately fits.

If you're partially decatting, are you going to get a remap done?

The STI suffers from boost spikes (apparently)

Cheers

Matt
Old 10 December 2003, 04:26 PM
  #3  
Silvafox
Scooby Regular
Thread Starter
iTrader: (1)
 
Silvafox's Avatar
 
Join Date: Sep 2003
Location: Nottingham
Posts: 835
Likes: 0
Received 0 Likes on 0 Posts
Post

Hello Matt, basically buying a decat centre pipe and Prodrive rear box off someone tonight and was just gonna swap them over. A remap is on the cards but not for a while? What are boost spikes?! Do you think I should just get the backbox for now?
Old 10 December 2003, 09:00 PM
  #4  
hades
Scooby Regular
 
hades's Avatar
 
Join Date: Jun 2002
Location: From Kent to Gloucestershire to Berkshire
Posts: 2,905
Likes: 0
Received 0 Likes on 0 Posts
Post

Should fit fine, centre included.

Boost spikes are when the turbo "overshoots" and produces too much boost, typically at around 4000rpm on an STi, this can cause det and engine failure.

Having said that, I believe the problems with boost spikes on STi7s normally come from changing the downpipe without remapping. Even with a downpipe change, it can be made safe with a very cheap modification to the diameter of the restrictor in the pipe to the boost solenoid. Check with someone who does mapping, like Scoobysport/Xtreme Scoobies/Bob Rawle/John Banks or whoever.

Old 11 December 2003, 09:08 AM
  #5  
PPPMAT
Scooby Regular
 
PPPMAT's Avatar
 
Join Date: Dec 2002
Posts: 362
Likes: 0
Received 0 Likes on 0 Posts
Post

Yep, as Hades says

The backbox alone should be fine. If you start decatting, I would speak with someone who knows a bit about it (TSL?)

As I understand it, there is a risk of boost spiking and without a boost gauge you can't keep an eye on it. TSL would know what to do to keep things safe.

Will sound nice

Matt
Old 11 December 2003, 10:30 AM
  #6  
Silvafox
Scooby Regular
Thread Starter
iTrader: (1)
 
Silvafox's Avatar
 
Join Date: Sep 2003
Location: Nottingham
Posts: 835
Likes: 0
Received 0 Likes on 0 Posts
Post

Cheers for advice guys. Picked up the backbox and decat last night. I'll take some advice off someone like TSL before fitting though. Cheers.

Simon
Old 11 December 2003, 02:48 PM
  #7  
Silvafox
Scooby Regular
Thread Starter
iTrader: (1)
 
Silvafox's Avatar
 
Join Date: Sep 2003
Location: Nottingham
Posts: 835
Likes: 0
Received 0 Likes on 0 Posts
Post

For anyone interested....just spoke to Gavin at TSL and he says the Decat Centre Pipe and backbox will go on fine without a remap or anything. Boost spikes shouldn't occur either due to the cat that exists in the downpipe. I'm leaving that pipe as it is. Booked in for next weekend.
Old 11 December 2003, 03:56 PM
  #8  
PPPMAT
Scooby Regular
 
PPPMAT's Avatar
 
Join Date: Dec 2002
Posts: 362
Likes: 0
Received 0 Likes on 0 Posts
Post

You learn something new everyday

What BHP gains then ?
Old 11 December 2003, 04:16 PM
  #9  
Silvafox
Scooby Regular
Thread Starter
iTrader: (1)
 
Silvafox's Avatar
 
Join Date: Sep 2003
Location: Nottingham
Posts: 835
Likes: 0
Received 0 Likes on 0 Posts
Post

He didn't say, I'd expect 5-6 bhp gain at a guess from when I've done it in the past. Just hope it sounds nice with a new found deeper burble with the new backbox on! He said if I'd changed the downpipe too then that 'may' produce the boost spikes but not necessarily.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
some cook
Subaru
24
23 December 2015 09:27 AM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
Danny0608
Subaru
6
27 September 2015 02:16 PM
Danny0608
Subaru Parts
0
12 September 2015 02:59 PM



Quick Reply: MY01 WRX PPP exhaust on to an STI7



All times are GMT +1. The time now is 07:52 PM.