98 Dump Valve Fitting Kit
#1
For a UK MY98 your standard dump valve is a black plastic jobby to the right of the intercooler (looking from front) just connected by 3 pipes, 2 large and one small (i.e. not bolted to the intercooler like some other impreza models).
If you are fitting a VTA dump valve (I assume supersound is a VTA ) all you need is a bung to put in the unused pipe (one of the larger pipes)
This is a forge one fitted - really easy to fit, re-use the clips on the old pipes. Had to bend the pipe going to the intercooler around for a better fit.
Rich
[Edited by Richard Curtis - 7/3/2003 10:35:16 PM]
If you are fitting a VTA dump valve (I assume supersound is a VTA ) all you need is a bung to put in the unused pipe (one of the larger pipes)
This is a forge one fitted - really easy to fit, re-use the clips on the old pipes. Had to bend the pipe going to the intercooler around for a better fit.
Rich
[Edited by Richard Curtis - 7/3/2003 10:35:16 PM]
#3
Presume the dump valve here is the chrome bit connected to the blue pipe next to the washer bottle? Am i right?
You'd never guess I had an engineering degree! (A loooong time ago).
You'd never guess I had an engineering degree! (A loooong time ago).
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM