mozbrown22

Can anyone advise me on how to change the side light bulbs on my scooby? It's a 1995 model!

Much appreciated

Dave

TonyBurns

iTrader: (3)

Dunno how easy it is on an MY95 but on my MY00 it took about 2 mins just have a look at the unit, its easier than you think

Tony

scoobybuzz

lift the bonnet and you wil find a philips screw above the headlight undo that and pull the side light out , easy

Scooby Bloo

Sometimes not that easy, I had to prise mine out with a long screwdriver. Still only took 2 mins.

mozbrown22

well it looks like i will have to use the screwdriver on mine as ive undone the screw and theres no movement

thanks dave

teknopete

Dave,

Before resorting to the screwdriver. Try this :

1/ undo the posidrive screw
2/ grip the plastic piece the screw was in
3/ place the butt of your other hand on the side of the side light close to the front corner about 3/4 of the way down & apply light pressure.
4/ Quickley pull on the plastic bracket and light casing with a forward motion at the same time and it should pop out.
(theres a small pop ball joint & clip holds the bugger in)

If that fails screwdriver it (but its worked on them all 4 me up2 now)

Pete