HKS FCD??
26 September 2002, 12:49 PM
#1
Scooby Regular
Thread Starter
Join Date: Aug 2001
Posts: 708
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone fitted one of these to an MY96? Am planning to fit one tonight but the wiring diagram I've got is vague to say the least!!
I would appreciate it if someone could tell which colour wire on the FCD goes to what colour wire on the ECU??
If not any idea's where I could find the info (have tried the HKS europe web site and not really much help)
Cheers
Ade
I would appreciate it if someone could tell which colour wire on the FCD goes to what colour wire on the ECU??
If not any idea's where I could find the info (have tried the HKS europe web site and not really much help)
Cheers
Ade
27 September 2002, 12:17 AM
#2
Scooby Regular
Join Date: Jul 2002
Posts: 806
Likes: 0
Received 0 Likes
on
0 Posts
Have fitted this onto my my93 wrx, pretty straightforward
obviously red to live, black to earth, i fitted the red to a switched live originally but have now changed it to a constant live as i was getting the cel light on if i turned the ignition too quickly.
the other 2 wires (white and yellow i think) basically cut into the MAP (pressure sensor from the ecu), doesnt matter which way they go on, just cut the pressure sensor wire, attached the bullets and then clip in.
Rich
obviously red to live, black to earth, i fitted the red to a switched live originally but have now changed it to a constant live as i was getting the cel light on if i turned the ignition too quickly.
the other 2 wires (white and yellow i think) basically cut into the MAP (pressure sensor from the ecu), doesnt matter which way they go on, just cut the pressure sensor wire, attached the bullets and then clip in.
Rich
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
crazyspeedfreakz
Wanted
17
05 October 2015 07:19 PM