2007 UK WRX STI to JDM EJ20 2007 swap
Thread Starter
Scooby Newbie
Joined: Apr 2020
Posts: 1
Likes: 0
From: Malta
2007 UK WRX STI to JDM EJ20 2007 swap
I am putting an EJ20 with a linkg4+ plugin in my WRX STI which came out with an EJ25 from the factory.
Now, I am going to use the EJ25 Wiring Harness for the EJ20.
Since the EJ25 uses Hall 3-wire cam sensors, I need to know how to swap out these for the Reluctor 2-wire sensors. Which wire from the 3-wire will not be used etc....
More over, The EJ20 has a place to install the front Cam Sensor which the EJ25 did not have. Can I still workin without it on the EJ20?
Now, I am going to use the EJ25 Wiring Harness for the EJ20.
Since the EJ25 uses Hall 3-wire cam sensors, I need to know how to swap out these for the Reluctor 2-wire sensors. Which wire from the 3-wire will not be used etc....
More over, The EJ20 has a place to install the front Cam Sensor which the EJ25 did not have. Can I still workin without it on the EJ20?
I am putting an EJ20 with a linkg4+ plugin in my WRX STI which came out with an EJ25 from the factory.
Now, I am going to use the EJ25 Wiring Harness for the EJ20.
Since the EJ25 uses Hall 3-wire cam sensors, I need to know how to swap out these for the Reluctor 2-wire sensors. Which wire from the 3-wire will not be used etc....
More over, The EJ20 has a place to install the front Cam Sensor which the EJ25 did not have. Can I still workin without it on the EJ20?
Now, I am going to use the EJ25 Wiring Harness for the EJ20.
Since the EJ25 uses Hall 3-wire cam sensors, I need to know how to swap out these for the Reluctor 2-wire sensors. Which wire from the 3-wire will not be used etc....
More over, The EJ20 has a place to install the front Cam Sensor which the EJ25 did not have. Can I still workin without it on the EJ20?
Thread
Thread Starter
Forum
Replies
Last Post
Milneragain
Lighting and Other Electrical
0
Dec 25, 2013 02:24 PM