Alternator/Power Steering Belt
01 December 2017, 01:01 PM
#1
Scooby Newbie
Thread Starter
Join Date: Apr 2015
Location: Woking
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Alternator/Power Steering Belt
Hi,
I own a 2002 Bugeye WRX Wagon and am having problems with the alternator belt squealing/chirping when cold. I have narrowed it down to this belt and not the a/c belt.
I have tried three brands of belt Dayco, Gates and Contitech. For around 2 to 3 months all is fine no noise. Then after this period they all start to squeal/chirp when cold. When the belt/engine has warmed up no noise.
Increasing the belt tension makes no difference. I have also tried smaller diameter belts which makes no difference. The most recent one is a Dayco one which just manages to fit onto the pulleys. This again has started to squeal chirp after a few months.
I have also tried using belt dressing.
Bearings all fine in power steering pump and alternator.
Have replaced the alternator. No change.
Pulleys are all aligned.
My last option I suppose is to buy a genuine Subaru Belt and to try changing the power steering pump....
Any suggestions/advice would be appreciated.
I own a 2002 Bugeye WRX Wagon and am having problems with the alternator belt squealing/chirping when cold. I have narrowed it down to this belt and not the a/c belt.
I have tried three brands of belt Dayco, Gates and Contitech. For around 2 to 3 months all is fine no noise. Then after this period they all start to squeal/chirp when cold. When the belt/engine has warmed up no noise.
Increasing the belt tension makes no difference. I have also tried smaller diameter belts which makes no difference. The most recent one is a Dayco one which just manages to fit onto the pulleys. This again has started to squeal chirp after a few months.
I have also tried using belt dressing.
Bearings all fine in power steering pump and alternator.
Have replaced the alternator. No change.
Pulleys are all aligned.
My last option I suppose is to buy a genuine Subaru Belt and to try changing the power steering pump....
Any suggestions/advice would be appreciated.
01 December 2017, 05:24 PM
#3
Scooby Newbie
Thread Starter
Join Date: Apr 2015
Location: Woking
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Hi,
Thanks for your suggestion. Car has gone 82k. Could be the pulleys I suppose. I did look at pulley replacement but it does look like it could be a pain to do......
Thanks for your suggestion. Car has gone 82k. Could be the pulleys I suppose. I did look at pulley replacement but it does look like it could be a pain to do......
01 December 2017, 08:59 PM
#5
Scooby Newbie
Thread Starter
Join Date: Apr 2015
Location: Woking
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Hi,
Thanks for the suggestions. It's definitely the power steering belt. I've replaced the AC tensioner and belt as I initially thought that this may be the culprit. Just to confirm this I also removed the AC belt totally and the noise still continued. The belt has also been re tensioned after it has bed in.
Thanks for the suggestions. It's definitely the power steering belt. I've replaced the AC tensioner and belt as I initially thought that this may be the culprit. Just to confirm this I also removed the AC belt totally and the noise still continued. The belt has also been re tensioned after it has bed in.
03 December 2017, 09:53 PM
#7
Scooby Newbie
Thread Starter
Join Date: Apr 2015
Location: Woking
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Hi. Thanks for the suggestion. Just put another new belt on today and no noise so don't think it is the power steering pump. I've applied minimal tension to this one. Just enough to stop the belt slipping when using the power steering when cold. I'm wondering if I've just tightened the previous belts too much and they have prematurely worn.....