boost soleniod
#1
Scooby Newbie
Thread Starter
Join Date: Apr 2017
Location: Torquay
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
boost soleniod
So was changing down pipe today and notice that the bottom pipe on the boost solenoid has come off from somewhere and has a bit of broken pipe left in it where does this pipe go? I think that where it goes someone has put a screw in (see pics) there why is that? btw I have a boost controller too
#2
If I'm looking at the right bit in the picture the bit with a screw innit is where the pipe from the solenoid goes from a 3 port , vents back into intake .
If your running a 2 port or controller you don't need this
If your running a 2 port or controller you don't need this
#3
Scooby Newbie
Thread Starter
Join Date: Apr 2017
Location: Torquay
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Cheers running a 3 port with controller. These down pipe bolts are a mare to get off lol as the one at the top on the passenger side I can't get enough leverage so having to undo intercooler bracket. Also snapped one off which I'm not sure what I'm going to do about any ideas
#4
Don't talk to me about downpipe bolts lol , just removed mine to remove up pipe , mare !!
My up pipe bolts are fooled with age
Best thing to use is a blow torch to heat the bolts/nuts up if not rounded
My up pipe bolts are fooled with age
Best thing to use is a blow torch to heat the bolts/nuts up if not rounded