seanvx

Has anyone had this happen it's a 03 jdm sti , I was fitting a reverse camera today , splicing into the reverse wires on back bulb and now there is no reverse beep or light does anyone know the fuse number , I've read about the position switch going so I hope it's not that

JDM_Stig

iTrader: (3)

which other lights aren`t working ?
I cant see a specific fuse for the reverse lights, but there are a few for lighting, so if you have anything else not working it may help,
have you checked the fuses behind the coin tray in the cabin ?
Fuse 5 is for Tail and parking lights.

seanvx

Ok thanks mate I saw that the rear lights were working with the indicators , couldn't check if the brake lights were working , I did look at all the fuses they looked fine along with the wiring

JDM_Stig

iTrader: (3)

Fuse 18, back up lights it was called.

JDM_Stig

iTrader: (3)

seanvx

Thanks is that for 03 and is that fuse board under the steering wheel

JDM_Stig

iTrader: (3)

yeah

JDM_Stig

iTrader: (3)

you can get the manual here, in the wiring PDF confirms it.

http://ken-gilbert.com/impreza-manuals

seanvx

Just changed the fuse and it still doesn't work

JDM_Stig

iTrader: (3)

do you have 12v at the rear ?
what did you do to the wiring ?

seanvx

I haven't got a multi meter to test if I have got 12v at rear. But I wired in red wire to brown on back reverse then black to black on back light then ran wire from brown wire to reverse wire on back my head unit , went turn it on then there's no reverse beep or light

JDM_Stig

iTrader: (3)

if you remove this wiring and check fuse again does it all work correctly ?

seanvx

No nothing , that's why I'm looking into the reverse switch have you had any dealings with the switch .