Notices
General Technical
Sponsored by:
Sponsored by: CARiD

Couple of problems

Thread Tools
 
Search this Thread
 
Old Jan 15, 2017 | 11:40 PM
  #1  
saxon's Avatar
saxon
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Jan 2015
Posts: 55
Likes: 0
From: warwickshire
Default Couple of problems

Right guys come out to my p1 tonight to go to work started it up and did a bit of faffing around until it had warned up when I got in I noticed my heater blowers weren't working and my abs light was on so I left it on the drive and too my Mrs car to work any info would be much appreciated. I had a problem a while ago where I had melted some wires by my headers and that caused the speedo to stop working but I had been using anti lag alot then
Reply
Old Jan 16, 2017 | 05:49 AM
  #2  
saxon's Avatar
saxon
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Jan 2015
Posts: 55
Likes: 0
From: warwickshire
Default

Right got home from work just checked my fuses they are all fine but I did notice when I go from zero to 4 on the heater switch there is a click just by the speedo cluster there so I presume this is a relay working so my fault must lie in the fan? Not had any joy with the abs though
Reply
Old Jan 16, 2017 | 12:58 PM
  #3  
alcazar's Avatar
alcazar
Scooby Regular
20 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Jun 2002
Posts: 40,788
Likes: 30
From: Rl'yeh
Default

Check your fuses. Did you replace the melted wires?
Reply
Old Jan 16, 2017 | 01:13 PM
  #4  
saxon's Avatar
saxon
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Jan 2015
Posts: 55
Likes: 0
From: warwickshire
Default

Yes mate the melted wires were years ago and checked all the fuses
Reply
Old Jan 16, 2017 | 01:57 PM
  #5  
saxon's Avatar
saxon
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Jan 2015
Posts: 55
Likes: 0
From: warwickshire
Default

Name:  20170116_133708_zpsgsyrxxl8.jpg
Views: 0
Size:  109.2 KB does anyone know which one is the live and earth out of these heater wires so I can connect a live and earth to see if the heater is working or not
Reply




All times are GMT +1. The time now is 11:16 PM.