HELP! Down pipe problem
#1
Scooby Newbie
Thread Starter
Join Date: Feb 2015
Location: Somerset
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
HELP! Down pipe problem
Hi everyone,
I've got a blobeye and I'm trying to fit my down pipe but it just won't fit I've got a 10mm gap on one side of the turbo housing and its touching the steering rack but no down pipe has fitted properly since I changed the turbo to a vf34 and put a Harvey pipe on it.
Any help would be great as I've got the point of breaking something!
I've got a blobeye and I'm trying to fit my down pipe but it just won't fit I've got a 10mm gap on one side of the turbo housing and its touching the steering rack but no down pipe has fitted properly since I changed the turbo to a vf34 and put a Harvey pipe on it.
Any help would be great as I've got the point of breaking something!
#4
Scooby Newbie
Thread Starter
Join Date: Feb 2015
Location: Somerset
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
#5
Scooby Newbie
Thread Starter
Join Date: Feb 2015
Location: Somerset
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Ye thanks bud I did do that after I had calmed down and actually thought about it!
Will be fitted this week hopefully as I had to get a sti column joint from mattyb because my wrx one is too fat!
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM