Notices
General Technical
Sponsored by:
Sponsored by: CARiD

Help needed

Thread Tools
 
Search this Thread
 
Old Jul 3, 2014 | 08:48 PM
  #1  
ace199's Avatar
ace199
Thread Starter
Scooby Regular
 
Joined: May 2011
Posts: 72
Likes: 0
Default Help needed

Hi can any one help me out plz I have a classic 2001 model it's
Starts ok but it ticks over very low and sounds like it's going to cut out and when u drive it low revs it sound like it going to cut out and revs are up and down changed the plugs leads coil fuel filter etc but still the same the only other thing which don't look right is the throttle body were it bolts on manifold it don't look like it fitted right as there a gap on side but it was running ok and it just happen so can't see it cozing it but may be wrong any ideals plz
Reply
Old Jul 3, 2014 | 09:25 PM
  #2  
ossett2k2's Avatar
ossett2k2
Scooby Regular
iTrader: (9)
 
Joined: Jan 2007
Posts: 6,433
Likes: 39
From: Leeds
Default

Try reading ecu for faults and go from there. And check all pipe work including intercooler for splits. Check here for ecu code reading and reset.
http://www.scoobypedia.co.uk/index.p...edge/ECUReset#
Reply
Old Jul 4, 2014 | 02:45 PM
  #3  
ClassicEddie's Avatar
ClassicEddie
Scooby Regular
 
Joined: Jun 2014
Posts: 120
Likes: 0
From: Berkshire
Default

Sounds a lot like its got an air leak to me. check the inlet ducts and associated pipework for splits. This would include "the throttle body were it bolts on manifold it don't look like it fitted right as there a gap on side". Maybe it was bodged with something to fill the gap and the engine ate it so now there's an open gap.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MH-Racing
Subaru Parts
18
Oct 18, 2015 04:49 PM
taylor85
Wanted
2
Sep 13, 2015 04:57 PM
AzzDSM
Engine Management and ECU Remapping
4
Sep 13, 2015 03:59 PM
Scooby-Doo 2
Wheels And Tyres For Sale
1
Sep 9, 2015 06:51 PM




All times are GMT +1. The time now is 06:02 AM.