tom-r33

iTrader: (2)

Hi guys, I'm not seeing any fault codes, but the engine won't start. If I unplug the TPS then the fault code for that appears, so I know that side of things is working. What I don't know is what could be faulty, but not show as a fault code! Crank angle sensor and cam angle sensor? Anything else? Are there any common faults you know of that could cause this?
Thanks in advance
Tom

Dmacnz

i would try removing crank and cam angle sensor, give them a clean and try again.

dj219957

can you hear the fuel pump prime?

tom-r33

iTrader: (2)

Crank and cam angle sensors look ok, I gave them a clean up too

Fuel pump runs

It appears to be getting fuel and spark! That's why I'm so confused!

So to summarise. We have spark, fuel and no fault codes present. But it doesnt run!