dom 1.5 or 2.5 on ej20 2.0L
#1
Scooby Newbie
Thread Starter
Join Date: Jun 2014
Location: belgium
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
dom 1.5 or 2.5 on ej20 2.0L
hi everybody, first i'll start off with a little intro of myself
I'm Jo, and I'm from Belgium
ok now thats done...
i have a fully forged ej20 closed deck with 2004 sti heads(ported), redlining till 8200rpm
3 inch downpipe, mid-pipe and end-pipe
spec 2 headers
6 speed sti gearbox
front mount intercooler
standalone ecu
etc...
in short words, all the supporting mods
i recently changed my injectors to 740cc
and I'm searching for a good turbo right now,
i'm looking for a minimum of 430-450 hp
turbo needs to be at full boost before or on 4000 rpm
should i take the blouch dominator 1.5 XTR and how much power can i make on that? what will be the spool like? with 8cm hot side
OR a blouch dominator 2.5 XTR "polka-pickle"
with a 8cm hot side of course
how will both turbo's "act" ?
because the only difference is the turbine wheel
turbo will be mapped on 1.8 - 1.9 bar (engine can handle it)
can one of you help me out? because i have no experience with these turbo's, the only thing i know is they are ******* good!
thanks!
I'm Jo, and I'm from Belgium
ok now thats done...
i have a fully forged ej20 closed deck with 2004 sti heads(ported), redlining till 8200rpm
3 inch downpipe, mid-pipe and end-pipe
spec 2 headers
6 speed sti gearbox
front mount intercooler
standalone ecu
etc...
in short words, all the supporting mods
i recently changed my injectors to 740cc
and I'm searching for a good turbo right now,
i'm looking for a minimum of 430-450 hp
turbo needs to be at full boost before or on 4000 rpm
should i take the blouch dominator 1.5 XTR and how much power can i make on that? what will be the spool like? with 8cm hot side
OR a blouch dominator 2.5 XTR "polka-pickle"
with a 8cm hot side of course
how will both turbo's "act" ?
because the only difference is the turbine wheel
turbo will be mapped on 1.8 - 1.9 bar (engine can handle it)
can one of you help me out? because i have no experience with these turbo's, the only thing i know is they are ******* good!
thanks!
Last edited by Joo; 16 June 2014 at 02:30 AM. Reason: forgot something to say
Thread
Thread Starter
Forum
Replies
Last Post