narelle

Hi all I've just finished rebuilding my track car and I've got no spark anyone no any test for crank sensor resistance values ect for a good one or a test for the coils it's individual coil packs thankyou

narelle

anyone any ideas?

merlin24

iTrader: (1)

Crank and Cam Sensor resistance should be 950~1,250 ohms at 20 Deg C.


Mick

merlin24

iTrader: (1)

To check the primary coil, the Resistance across coil pack connector should be 0.7 ohm.
Secondary coil, the Resistance between pin 1 on coil pack connector to spark plug connector should be 13.8 k ohm.

scoobyJim2

Have you checked your earths are all connected and Tight!? Sometimes half a turn on a spanner can make all the difference. Start at the battery and and with your hand trace the earths everywhere they go,nipping with spanner at every termination point.

narelle

Thanks for the help guys will give it a go tonight see how I get on