ScoobyNet.com - Subaru Enthusiast Forum
With shelf back in it looks factory fitted. Even hides the upper strut brace
With shelf back in it looks factory fitted. Even hides the upper strut brace
0 2016/08/09 06:48:54
Another of the rear re-assembled
Another of the rear re-assembled
0 2016/08/09 06:48:21
Rear adjustment, I trimmed the standard trim and you do not need extenders.
Rear adjustment, I trimmed the standard trim and you do not need extenders.
0 2016/08/09 06:47:50
Adjustable top mount
Adjustable top mount
0 2016/08/09 06:47:35
Now adjusted down by 100mm at rear and 50mm at front. I ended up going up by 10mm again at teh rear to it's current height shown in post 1.
Now adjusted down by 100mm at rear and 50mm at front. I ended up going up by 10mm again at teh rear to it's current height shown in post 1.
0 2016/08/09 06:46:42
Another at max height adjust after a drive to settle.
Another at max height adjust after a drive to settle.
0 2016/08/09 06:46:16
Set at max height adjust front & rear. Front was 370mm hub centre to wheel arch and rear was 410mm hub centre to wheel arch.
Set at max height adjust front & rear. Front was 370mm hub centre to wheel arch and rear was 410mm hub centre to wheel arch.
0 2016/08/09 06:45:12
Front comparison of Pedders & MeisterR units
Front comparison of Pedders & MeisterR units
0 2016/08/09 06:44:20
Front coilover set at max height
Front coilover set at max height
0 2016/08/09 06:43:59
Measurement between nuts for front height setting at max height
Measurement between nuts for front height setting at max height
0 2016/08/09 06:43:28
Other side fitted 2
Other side fitted 2
0 2016/08/09 06:43:10
Other side rear fitted
Other side rear fitted
0 2016/08/09 06:42:37
Pedders & MeisterR comparison 3
Pedders & MeisterR comparison 3
0 2016/08/09 06:41:17
Pedders & MeisterR comparison 2
Pedders & MeisterR comparison 2
0 2016/08/09 06:41:05
Pedders & MeisterR comparison 1
Pedders & MeisterR comparison 1
0 2016/08/09 06:40:53
Rear height measured, also showing the white PTFE grease on the threads
Rear height measured, also showing the white PTFE grease on the threads
0 2016/08/09 06:40:10
Another pic of rear fitted
Another pic of rear fitted
0 2016/08/09 06:39:43
Rear fitted
Rear fitted
0 2016/08/09 06:39:23
Initially set to 80mm of insertion into carrier, max height.
Initially set to 80mm of insertion into carrier, max height.
0 2016/08/09 06:38:15
Interior apart for fitting, very easy to do.
Interior apart for fitting, very easy to do.
0 2016/08/09 06:37:54
Before fitting with Pedders still installed
Before fitting with Pedders still installed
0 2016/08/09 06:37:28
Pedders Height before fitting 2
Pedders Height before fitting 2
0 2016/08/09 06:37:07
Pedders Height before fitting 1
Pedders Height before fitting 1
0 2016/08/09 06:36:20
0 2016/08/01 09:04:31
0 2016/07/22 07:46:44
0 2016/07/22 07:46:27
0 2016/07/22 07:45:47
0 2016/07/22 07:45:26
0 2016/07/21 08:51:11
0 2016/07/21 08:50:57
0 2016/07/21 08:18:04
0 2016/07/21 08:17:46
0 2016/07/04 08:53:29
0 2016/07/04 07:37:33
0 2016/06/30 07:26:50
0 2016/06/23 01:34:05
0 2016/06/23 01:33:19
0 2016/06/21 08:39:14
0 2016/06/21 08:38:58
0 2016/06/21 08:38:33