++++ BREAKING HIGH SPEC CLASSIC, 6SPD, BREMBO, FMIC, MD321T, 740NISMO, 2.0 FORGED++++
#1
Formerly ScoobyTeknix
Thread Starter
iTrader: (64)
Join Date: Feb 2011
Location: Fleetwood, Lancashire
Posts: 2,926
Likes: 0
Received 0 Likes
on
0 Posts
++++ BREAKING HIGH SPEC CLASSIC, 6SPD, BREMBO, FMIC, MD321T, 740NISMO, 2.0 FORGED++++
Hi all we have just got this 1999 turbo 2000 in for breaking that features many nice parts that are already fitted and working and then a load of un fitted part that would have taken the car to the next level the current spec of the car is as follows: sti 5 long engine, vf 30 turbo, 440cc injectors autobahn fmic, induction kit, 3" sports cat grahamgoode racing exhaust, ecutek remap, 2003 sti 8 6 speed gearbox with ap racing clutch and fidanza 4.6 flywheel, brembo front brakes, perrin anti roll bars 22mm front and 24mm rear with perrin mounts, whiteline anti lift kit, whiteline roll centre adjustment kit, KYB AGX gas adjustable struts with g-max lowering springs, cusco front and rear strut braces, h-brace, 17" O.Z superleggeras, GGR boost gauge, 3x prosport gauges with dash top pod, apexi turbo timer,
Now for the un fitted parts: 2.0 fully forged closed deck block machined for rear thrust v9 nitrated crank built with manley rods and 92.5 wisco pistons, V6 sti heads that have been fully overhauled and skimmed, Adjustable vernier pulleys, Lateral MD321T with 3" inlet pipe that has no take offs, RCM GT spec 3 Bolt headers, Fuellab Fpr, Parallel fuel rails plus all new fittings and pipe, 740cc nismo injectors, Spec r alloy water bottle, Crinkle black inlet manifold, Manifold spacers, Polished throttle body, oil cooler kit, manifold spacers, lightweight pulley set, sparco harness set, 1 pair of motor drive light weight bucket seats, 3" decat pipe, clifford alarm kit,
un fitted parts
ENGINE
Now for the un fitted parts: 2.0 fully forged closed deck block machined for rear thrust v9 nitrated crank built with manley rods and 92.5 wisco pistons, V6 sti heads that have been fully overhauled and skimmed, Adjustable vernier pulleys, Lateral MD321T with 3" inlet pipe that has no take offs, RCM GT spec 3 Bolt headers, Fuellab Fpr, Parallel fuel rails plus all new fittings and pipe, 740cc nismo injectors, Spec r alloy water bottle, Crinkle black inlet manifold, Manifold spacers, Polished throttle body, oil cooler kit, manifold spacers, lightweight pulley set, sparco harness set, 1 pair of motor drive light weight bucket seats, 3" decat pipe, clifford alarm kit,
un fitted parts
ENGINE
Trending Topics
#18
Formerly ScoobyTeknix
Thread Starter
iTrader: (64)
Join Date: Feb 2011
Location: Fleetwood, Lancashire
Posts: 2,926
Likes: 0
Received 0 Likes
on
0 Posts
pro sport £100 with pod and sensors
md321 t is £950 currently been tested on our track car, headers are gt spec and are £290
forged engine block is now a long engine to suit an sti 7/8/9 been fitted to my sti 9 just to test and everything is ok £2200 for the long motor
£200 for the nismo 7400cc injectors
sorry sold
£290 plus shipping
£60 collected, delivery can be arranged pm me for more details
#19
If in good nick/ no broken clips etc - how much for the centre console around the hand brake/ gear stick etc, complete with lid and also the two trim panels either side of the radio / climate bit?
cheers
cheers
#27
Scooby Newbie
Join Date: Aug 2011
Location: Worcestershire
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Hi,
I am after the rubbers that run along the top of the wind screen and along the passenger side roof to the boot as they decided to come off on the motorway somewhere!
I have a Type R, do you know if these would fit mine? Mine were in very good condition, I am ideally after the rubbers with no scratches etc..
I am after the rubbers that run along the top of the wind screen and along the passenger side roof to the boot as they decided to come off on the motorway somewhere!
I have a Type R, do you know if these would fit mine? Mine were in very good condition, I am ideally after the rubbers with no scratches etc..