It's Back....... :) Zak's done it again!
#1
Scooby Regular
Thread Starter
Join Date: Sep 2006
Location: R.I.P. R.A. :(
Posts: 4,019
Likes: 0
Received 0 Likes
on
0 Posts
It's Back....... :) Zak's done it again!
The Type R is back on the road and the smile has returned
So here's the additions:
Replaced STI bottom end (Note STI Phil!!!!!) with Closed Deck Block for handling extra power....
Forged Pistons and rods
All matched to my STI Heads.....
Fuel Lab Regulator
Walbro Fuel Pump
All tied together with a new Apexi PFC
Car feels very nice at the moment but taking it easy for now..... running minimal boost at the moment, but should be able to turn it up soon
With a couple more additions like an STI 9 intercooler and bigger injectors I may be able to run up to 2 bar as the block should handle it
Thanks to Zak and all at Mocom
OK, it needs a clean!!!
So here's the additions:
Replaced STI bottom end (Note STI Phil!!!!!) with Closed Deck Block for handling extra power....
Forged Pistons and rods
All matched to my STI Heads.....
Fuel Lab Regulator
Walbro Fuel Pump
All tied together with a new Apexi PFC
Car feels very nice at the moment but taking it easy for now..... running minimal boost at the moment, but should be able to turn it up soon
With a couple more additions like an STI 9 intercooler and bigger injectors I may be able to run up to 2 bar as the block should handle it
Thanks to Zak and all at Mocom
OK, it needs a clean!!!
#4
Scooby Regular
Thread Starter
Join Date: Sep 2006
Location: R.I.P. R.A. :(
Posts: 4,019
Likes: 0
Received 0 Likes
on
0 Posts
#7
Scooby Regular
Join Date: Feb 2004
Location: Going round in circles in a Mini
Posts: 5,485
Likes: 0
Received 0 Likes
on
0 Posts
No worries mate, Zak has had some supply issues so could not get on with mine anyway. Good job to, as I have just bought another goodie to go on when it is put back together
Originally Posted by Milamber
Oh look it's like an intercooler only ...... smaller
Trending Topics
#9
Scooby Regular
iTrader: (17)
The Type R is back on the road and the smile has returned
So here's the additions:
Replaced STI bottom end (Note STI Phil!!!!!) with Closed Deck Block for handling extra power....
Forged Pistons and rods
All matched to my STI Heads.....
Fuel Lab Regulator
Walbro Fuel Pump
All tied together with a new Apexi PFC
Car feels very nice at the moment but taking it easy for now..... running minimal boost at the moment, but should be able to turn it up soon
With a couple more additions like an STI 9 intercooler and bigger injectors I may be able to run up to 2 bar as the block should handle it
Thanks to Zak and all at Mocom
OK, it needs a clean!!!
So here's the additions:
Replaced STI bottom end (Note STI Phil!!!!!) with Closed Deck Block for handling extra power....
Forged Pistons and rods
All matched to my STI Heads.....
Fuel Lab Regulator
Walbro Fuel Pump
All tied together with a new Apexi PFC
Car feels very nice at the moment but taking it easy for now..... running minimal boost at the moment, but should be able to turn it up soon
With a couple more additions like an STI 9 intercooler and bigger injectors I may be able to run up to 2 bar as the block should handle it
Thanks to Zak and all at Mocom
OK, it needs a clean!!!
#13
Scooby Regular
Thread Starter
Join Date: Sep 2006
Location: R.I.P. R.A. :(
Posts: 4,019
Likes: 0
Received 0 Likes
on
0 Posts
Need to recover from the rebuild first
Then I'll have a look at the pennies and go from there.... Zak said I should go for the front mount with inverted inlet manifold and some huge U.S. made turbo......
May just get the STI9 one for now as that will be a great improvement over what I currently have and I should get my money back on it as they don't ever seem to drop below around £200.....
I'm also seriously looking at changing my back box..... it's a new H&S Jap style box but it's too loud!!!! I put a new sound system with boxed sub and can't even hear it unless I'm doing 2 mph......
David....
Can't wait to see yours back on the road.... any special plans?
Then I'll have a look at the pennies and go from there.... Zak said I should go for the front mount with inverted inlet manifold and some huge U.S. made turbo......
May just get the STI9 one for now as that will be a great improvement over what I currently have and I should get my money back on it as they don't ever seem to drop below around £200.....
I'm also seriously looking at changing my back box..... it's a new H&S Jap style box but it's too loud!!!! I put a new sound system with boxed sub and can't even hear it unless I'm doing 2 mph......
David....
Can't wait to see yours back on the road.... any special plans?
#14
Essex Area Moderator
iTrader: (7)
Need to recover from the rebuild first
Then I'll have a look at the pennies and go from there.... Zak said I should go for the front mount with inverted inlet manifold and some huge U.S. made turbo......
May just get the STI9 one for now as that will be a great improvement over what I currently have and I should get my money back on it as they don't ever seem to drop below around £200.....
I'm also seriously looking at changing my back box..... it's a new H&S Jap style box but it's too loud!!!! I put a new sound system with boxed sub and can't even hear it unless I'm doing 2 mph......
David....
Can't wait to see yours back on the road.... any special plans?
Then I'll have a look at the pennies and go from there.... Zak said I should go for the front mount with inverted inlet manifold and some huge U.S. made turbo......
May just get the STI9 one for now as that will be a great improvement over what I currently have and I should get my money back on it as they don't ever seem to drop below around £200.....
I'm also seriously looking at changing my back box..... it's a new H&S Jap style box but it's too loud!!!! I put a new sound system with boxed sub and can't even hear it unless I'm doing 2 mph......
David....
Can't wait to see yours back on the road.... any special plans?
Fair enough,
But why have a closed deck block, pistons, rods etc blah blah blah if youre not going to use it?
Im now guessing you havent had this built, you have purchased the engine S?H is this state of build???
Lose the sound system mate.. the sound of a ball bearing turbo and a wastegate @ 2 bar is all the music you'll ever need.
#16
Scooby Regular
Join Date: Apr 2005
Location: Basildon, Essex Scoobyless Crew - MX5 Division
Posts: 2,264
Likes: 0
Received 0 Likes
on
0 Posts
[quote=bibo_boy;7077386]
May just get the STI9 one for now as that will be a great improvement over what I currently have and I should get my money back on it as they don't ever seem to drop below around £200.....
quote]
Mate I got one from Fleabay from a 04 car for £165 inc postage... just got to get lucky
May just get the STI9 one for now as that will be a great improvement over what I currently have and I should get my money back on it as they don't ever seem to drop below around £200.....
quote]
Mate I got one from Fleabay from a 04 car for £165 inc postage... just got to get lucky
#17
Scooby Regular
Thread Starter
Join Date: Sep 2006
Location: R.I.P. R.A. :(
Posts: 4,019
Likes: 0
Received 0 Likes
on
0 Posts
Fair enough,
But why have a closed deck block, pistons, rods etc blah blah blah if youre not going to use it?
Im now guessing you havent had this built, you have purchased the engine S?H is this state of build???
Lose the sound system mate.. the sound of a ball bearing turbo and a wastegate @ 2 bar is all the music you'll ever need.
But why have a closed deck block, pistons, rods etc blah blah blah if youre not going to use it?
Im now guessing you havent had this built, you have purchased the engine S?H is this state of build???
Lose the sound system mate.. the sound of a ball bearing turbo and a wastegate @ 2 bar is all the music you'll ever need.
Yep brought the bottom end already built... Had it pressure tested by Zak and cleaned up as much as possible.... (it had only supossed to had done less than 10K since it was built with all new internals, built by a reasonable source)
Me and Zak sat down and decided that due to the fact I managed to get the bottom end for a very very reasonable price it's worth it.
BTW, you could be right about the sound system..... it weighs far too much... but i wouldn't hear the Wastegate over the exhaust!!!!
#18
Essex Area Moderator
iTrader: (7)
Cheers Frayz...
Yep brought the bottom end already built... Had it pressure tested by Zak and cleaned up as much as possible.... (it had only supossed to had done less than 10K since it was built with all new internals, built by a reasonable source)
Me and Zak sat down and decided that due to the fact I managed to get the bottom end for a very very reasonable price it's worth it.
BTW, you could be right about the sound system..... it weighs far too much... but i wouldn't hear the Wastegate over the exhaust!!!!
Yep brought the bottom end already built... Had it pressure tested by Zak and cleaned up as much as possible.... (it had only supossed to had done less than 10K since it was built with all new internals, built by a reasonable source)
Me and Zak sat down and decided that due to the fact I managed to get the bottom end for a very very reasonable price it's worth it.
BTW, you could be right about the sound system..... it weighs far too much... but i wouldn't hear the Wastegate over the exhaust!!!!
You wont have time to worry about hearing anything with 2 bar on a GT30...
Do it.. you know you want to
#20
Scooby Regular
Thread Starter
Join Date: Sep 2006
Location: R.I.P. R.A. :(
Posts: 4,019
Likes: 0
Received 0 Likes
on
0 Posts
Hi Mike....
I'm never going to be a Track day regular.... but I have a trip to the ring soon and I'm going to try and get a few in this year once the car is ready....
To be honest, all I want is to be able to get myself out of trouble when I need it.... Also I told Zak that I went through cars quite quickly (2nd scoob in 6 months!) and what could I do to stop getting bored.... he said big power...
I'm never going to be a Track day regular.... but I have a trip to the ring soon and I'm going to try and get a few in this year once the car is ready....
To be honest, all I want is to be able to get myself out of trouble when I need it.... Also I told Zak that I went through cars quite quickly (2nd scoob in 6 months!) and what could I do to stop getting bored.... he said big power...
#21
Scooby Regular
Join Date: Jan 2007
Location: Things turn out best for those who make the best of the way things turn out
Posts: 942
Likes: 0
Received 0 Likes
on
0 Posts
Nice setup Ian and glad to see it back on the road
Next time you need to drive faster.............
to keep it cool of course
Next time you need to drive faster.............
to keep it cool of course
#22
Scooby Regular
iTrader: (1)
Join Date: May 2005
Location: Back in the UK at last!!!
Posts: 2,084
Likes: 0
Received 0 Likes
on
0 Posts
Hi Mike....
I'm never going to be a Track day regular.... but I have a trip to the ring soon and I'm going to try and get a few in this year once the car is ready....
To be honest, all I want is to be able to get myself out of trouble when I need it.... Also I told Zak that I went through cars quite quickly (2nd scoob in 6 months!) and what could I do to stop getting bored.... he said big power...
I'm never going to be a Track day regular.... but I have a trip to the ring soon and I'm going to try and get a few in this year once the car is ready....
To be honest, all I want is to be able to get myself out of trouble when I need it.... Also I told Zak that I went through cars quite quickly (2nd scoob in 6 months!) and what could I do to stop getting bored.... he said big power...
Thread
Thread Starter
Forum
Replies
Last Post
frayz
Essex Subaru Owners Club
12
30 June 2006 06:46 PM