Zak.. Cant thank you enough. More Mocom Racing praise!!
24 January 2007, 08:16 PM
#1
Zak.. Cant thank you enough. More Mocom Racing praise!!
I know you all here me talk about Zak and Mocom Racing alot but this time i really felt i needed to say something... If i made a thread all the times Zak helps me out there would be hundreds of em lol. 
Last night the STI formed her latest incarnation... With the new custom 80mm induction kit and the boost wound up the 20g is really showing the cars capabilities.
Now pushing 1.5bar all the way to the redline its getting naughty.. I will get Zak to email me the screen shots of the dyno data and in gear times etc so you all have the results to see.
I must admit that if you keep the turbo on the boil.. she really does fly. It makes some seriously nice noises now, flames, pops bangs and all sorts. Her mid to top end power is really quite strong now and i think the only word that discribes the power delivery is relentless.
Zak, once again mate.. thankyou so much.
i owe ya
Last night the STI formed her latest incarnation... With the new custom 80mm induction kit and the boost wound up the 20g is really showing the cars capabilities.
Now pushing 1.5bar all the way to the redline its getting naughty.. I will get Zak to email me the screen shots of the dyno data and in gear times etc so you all have the results to see.
I must admit that if you keep the turbo on the boil.. she really does fly. It makes some seriously nice noises now, flames, pops bangs and all sorts. Her mid to top end power is really quite strong now and i think the only word that discribes the power delivery is relentless.
Zak, once again mate.. thankyou so much.
i owe ya
Last edited by frayz; 24 January 2007 at 08:48 PM.
Trending Topics
24 January 2007, 09:22 PM
#10
Thats the whole point mate. The fact that you dont change something for the sake of it.
To me its development.. not just modding. Its a car that has been tuned with IMO the right parts that work together and all are there for a reason.
24 January 2007, 09:22 PM
#11
Scooby Regular
Frayz, you know you can still run more boost 
80mm inlet ? did you change anything on the 20G to make it fit ?
80mm inlet ? did you change anything on the 20G to make it fit ?
24 January 2007, 09:29 PM
#12
The stock turbo pipe has been retained to prevent surge.. this is possibly the reason i may be going back to a recirculating dump valve..
I may just buy a recirc kit for my HKS one. 740cc injectors, and parallel fuel rails are next on the menu.. just for safety really.
The topmount is staying for as long as possible.. last night i didnt see anything above 24 deg C even at WOT, full load in 6th... although a front mount will be developed for better flow when its required.
Other parts will include a light weight pulley kit and a few other bits
24 January 2007, 09:50 PM
#13
Scooby Regular
If you do the parallel mod let me know EXACTLY what you do, as I've asked people before and most say the Newage doesn't need it ???
Oh, and I've gone back to full re-circ and its much better
Oh, and I've gone back to full re-circ and its much better
24 January 2007, 09:58 PM
#14
My fuel system is already built at Mocom, 6-AN rails, 740cc injectors and full aeroquip hose setup. The car already runs a Fuelab FPR and is currently set to 3.8bar at idle.
I didnt see my last duty cycle last night but I can let you know if need be when i see the data logging on the laptop.
25 January 2007, 08:39 AM
#15
Scooby Regular
iTrader: (7)
Join Date: Jan 2007
Location: Back in Diesel wonderland - 3.0 TDi Quattro A4, with more toys than Ann Summers...lol
Posts: 4,984
Likes: 0
Received 0 Likes
on
0 Posts
Good to see your getting more from the scoob now, I like the way the car has obviously been developed personally and there has been a definate plan of action and vision from yourself.
Can't wait to get my next one (hopefully summer) and sample some of that Mocom magic.
Can't wait to get my next one (hopefully summer) and sample some of that Mocom magic.
Please dont start him of again 
25 January 2007, 08:13 PM
#18
Here you go... for those interested
As promised.. please remember these figures are AT THE WHEELS
Funny really how my in gear times are virtually no different to when we threw 1.6 bar through my old VF35 but these are only in 4th gear and up to 90mph. Where she really comes good are through the gears and my 30mph to 130mph area.
This graph follows my other one untill about 5.5k rpm after that, this turbo blitzs the old one. The graph being the same is due to the boost being only kept to 1.3 bar until around 4k. This is to combat surge from big boost.. however hopefully we have some neat ideas to reduce surge and hopefully wind the boost up alot more in the middle.. maybe 1.6 to 1.7 bar.
Currently she runs and holds 1.5bar to the redline.
In gear times are as follows..
40-60mph = 2.7 sec
50-70mph = 2.5 sec
60-80mph = 2.6 sec
70-90mph = 2.9 sec
As promised.. please remember these figures are AT THE WHEELS
Funny really how my in gear times are virtually no different to when we threw 1.6 bar through my old VF35 but these are only in 4th gear and up to 90mph. Where she really comes good are through the gears and my 30mph to 130mph area.
This graph follows my other one untill about 5.5k rpm after that, this turbo blitzs the old one. The graph being the same is due to the boost being only kept to 1.3 bar until around 4k. This is to combat surge from big boost.. however hopefully we have some neat ideas to reduce surge and hopefully wind the boost up alot more in the middle.. maybe 1.6 to 1.7 bar.
Currently she runs and holds 1.5bar to the redline.
In gear times are as follows..
40-60mph = 2.7 sec
50-70mph = 2.5 sec
60-80mph = 2.6 sec
70-90mph = 2.9 sec
25 January 2007, 08:37 PM
#21
Double click the graph to make it bigger
Yup 302.8WHP.. or there abouts.. i never trust dynos.. only my *** dyno
At 16% loss of which personally i think is more accurate its 351.2bhp
At 25% loss (other tuners seem to use) it calculates to 378.5bhp
Personally im happy to accept the lower figure.. im not into bhp figures.. just how it feels on the road
Yup 302.8WHP.. or there abouts.. i never trust dynos.. only my *** dyno
At 16% loss of which personally i think is more accurate its 351.2bhp
At 25% loss (other tuners seem to use) it calculates to 378.5bhp
Personally im happy to accept the lower figure.. im not into bhp figures.. just how it feels on the road
25 January 2007, 08:48 PM
#23
Hopefully depending on where the development takes us circa 420bhp is the current ultimate goal for what i feel will be a very capable road/track car with good response and drivability.
A big build and a twisted Garrett setup would be nice but IMO would not make the car nice to drive for how i want it to be... I want it to be responsive and a least peaky as possible.
Who knows.. 550+ is not out of reach
A big build and a twisted Garrett setup would be nice but IMO would not make the car nice to drive for how i want it to be... I want it to be responsive and a least peaky as possible.
Who knows.. 550+ is not out of reach
25 January 2007, 09:12 PM
#24
Scooby Regular
Frayz, if you have the DD dyno file, mail it over to me I'd like to have a look and can overlay it on mine. Gotta get out and do a DD run this weekend
Thread
Thread Starter
Forum
Replies
Last Post
Pro-Line Motorsport
Car Parts For Sale
2
29 September 2015 07:36 PM