Loom help.
#1
Scooby Newbie
Thread Starter
Join Date: Aug 2015
Location: UK
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Loom help.
2004 sti loom help please. Have the full loom which I need help identifying what goes where. First off are these connectors which are all engine bay side of bulkhead grommets.
#3
Scooby Regular
looks like the small group of wires that is for the boost control solenoid (blue plug) , the wire closets to your foot and very short looks like the wire that connects to the brake servo but I could be wrong as its still early lol
#7
Scooby Regular
The rest of the loom connections are listed to the rear of this manual section
2004 Impreza wiring pdf
Trending Topics
#10
Scooby Regular
You can download the complete manual here
MY05 Impreza Workshop Manual pdf
ECU Pin outs pages 1181-4
MY05 Impreza Workshop Manual pdf
ECU Pin outs pages 1181-4
#11
Scooby Regular
#12
Scooby Regular
#13
Scooby Newbie
Thread Starter
Join Date: Aug 2015
Location: UK
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Thanks again Don. The workshop manual PDF only goes up to page 103. Can you give me the whole manual or Immobilizer 184, keyless entry 188, rad fan 238, security system 251, starter system 253. Thanks again really appreciate your help.....from a newbie just learning about Subies.
#14
Scooby Regular
Thanks again Don. The workshop manual PDF only goes up to page 103. Can you give me the whole manual or Immobilizer 184, keyless entry 188, rad fan 238, security system 251, starter system 253. Thanks again really appreciate your help.....from a newbie just learning about Subies.
The MY05 manual download has 3728 pages - and they are all there
#15
Scooby Regular
#17
Ecu Specialist
Don the MY04 manual is the Eurospec manual not the USDM? just to check as I have seen a lot of people use the USDM which is, of course, wrong being for a 2.5 litre car
good info
bob
good info
bob
#18
Scooby Regular
It is, Euro and general markets, I try to stay clear of the US manuals as a lot is not applicable
Last edited by Don Clark; 08 July 2017 at 08:15 AM.
#19
Scooby Newbie
Thread Starter
Join Date: Aug 2015
Location: UK
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Loom help.
I'm going to make a stand alone loom to run my wrx sti in a Beetle, using the factory ecu. It won't need all the emission stuff or usual body accessories. Does anyone already make such a harness?
#20