HKS Ecu and boost controller
20 January 2016, 10:04 PM
#1
Scooby Newbie
Thread Starter
Join Date: Dec 2015
Location: Staffordshire
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
HKS Ecu and boost controller
Hi does anyone know a good place to get my car mapped using my HKS Ecu? Ideally round the Midlands
Also is there anyone that can tell me how to change the reading from KPA to PSI on my EVC 5
Thanks
Also is there anyone that can tell me how to change the reading from KPA to PSI on my EVC 5
Thanks
22 January 2016, 09:42 AM
#2
HKS EVC V instructions are here mr:
Setup Guide:
http://www.bludgod.com/subaru/hks-evc-v-setup.pdf
Install Manual:
http://www.bludgod.com/subaru/hks-ev...ion-manual.pdf
I dont think there is a way to switch between KPA and PSI though, they made 2 different screens to check the part number on your display unit. P/N for the PSI Display Unit is 45999-BK001, yours probably has something else.
Setup Guide:
http://www.bludgod.com/subaru/hks-evc-v-setup.pdf
Install Manual:
http://www.bludgod.com/subaru/hks-ev...ion-manual.pdf
I dont think there is a way to switch between KPA and PSI though, they made 2 different screens to check the part number on your display unit. P/N for the PSI Display Unit is 45999-BK001, yours probably has something else.
22 January 2016, 09:32 PM
#3
Scooby Newbie
Thread Starter
Join Date: Dec 2015
Location: Staffordshire
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
HKS EVC V instructions are here mr:
Setup Guide:
http://www.bludgod.com/subaru/hks-evc-v-setup.pdf
Install Manual:
http://www.bludgod.com/subaru/hks-ev...ion-manual.pdf
I dont think there is a way to switch between KPA and PSI though, they made 2 different screens to check the part number on your display unit. P/N for the PSI Display Unit is 45999-BK001, yours probably has something else.
Setup Guide:
http://www.bludgod.com/subaru/hks-evc-v-setup.pdf
Install Manual:
http://www.bludgod.com/subaru/hks-ev...ion-manual.pdf
I dont think there is a way to switch between KPA and PSI though, they made 2 different screens to check the part number on your display unit. P/N for the PSI Display Unit is 45999-BK001, yours probably has something else.
Thread
Thread Starter
Forum
Replies
Last Post
FER9IE
Scotland
5
02 February 2016 08:29 PM