chloe123

iTrader: (2)

Have a clunking noise in the 6 speed dccd wr1 when turning in any direction ... The car drives good when foot down in straight lines and even when cornering what could be the problem as its been happening for a while now

Thanks

rickya

iTrader: (18)

What setting have you got the DCCD on?

chloe123

iTrader: (2)

No visual display just set it to the opposite to full lock

rickya

iTrader: (18)

Could be any number of things e.g. driveshafts, propshaft, diff itself or noise could be non diff ererelated and may be suspension related e.g. lose hub, wheel, ball joint, drop link etc. When was the diff and gearbox fluid last changed and are you sure the diff is not stuck in a more locked setting somehow.

chloe123

iTrader: (2)

Thank,,,, what i will do is change the fluids .. What fluid do i need for the gear box and diff ? And the amount i have been looking is it:

Diff 1 litre
Gearbox 4litres

oliVeR6

When my hawkeye is set to auto I get a bit of clunking when moving slowly with the steering on full lock. This is totally normal and is just the diffs

chloe123

iTrader: (2)

Really thats good to hear that got bit worried saying that though been happening since i out the box in

**jay**

iTrader: (1)

What car have you fitted it too? if it has the auto function switch it off and wind the control wheel right back and give it a try, should be quiet then, but you will get clunking at slow speeds when the dccd is wound forward.
Jay

TonyBurns

iTrader: (3)

It sounds as though you are in auto mode, basically you need to switch it to manual, what you are hearing is the differential doing its job, in open (fully back on manual) you wont get any noise, if you wind it up a little to say the first orange, you will begin to "feel" the differential working (during turning).
If you need a demonstration then im back in Manchester next week

Tony

chloe123

iTrader: (2)

basically the 6 speed is out of a wr1 into a classic and it it controlled by a i think a dccd pro.... it has a **** which turns left for open right to lock..... there is no visual display telling where exactly it is..

yes please tony when will you arrive in manchester pm me your contact number

many thanks

phill_evs

hi guys i have the same problem on mine but it seems to be just as bad when im scrolled right to the bottom nd in green!! really worried about this and seems to be grabbing on front right wheel but this could be me paranoid!! any ideas what this could be??? please try help me guys????

phill_evs

can someone please help me?????:co nfused:

rallycol

iTrader: (4)

Where about in Wales are you?

chloe123

iTrader: (2)

Been told myn might be a driveshaft so will try that now