DV Fitting Guide?
#1
Scooby Regular
Thread Starter
Join Date: Dec 2001
Location: Herts
Posts: 1,693
Likes: 0
Received 0 Likes
on
0 Posts
Any one have one? Soon as the weather holds out enough Im gonna attempt to fit the Bailey DV I got s/h but could do with a guide/instructions first if poss??
Cheers
Dave
Cheers
Dave
#4
I presume your DV is down below the intercooler on the passenger side.
Is it a vent to atmosphere one?
If it is, should have a blanking plug to plug up the recirc pipe.
There will be 3 pipes connected to your DV, One is from the intercooler into the DV, one is a skinny pipe that leads back to your inlet manifold and the other recircs back into your inlet tract.
Connect the new DV to the pipe from the intercooler and the skinny pipe and bung up the pipe that leads away under your intercooler with the bung and hose clip.
Using samco/uprated hoses to and from it is a good idea too, especially if you run high boost.
Think that should be ok.
cheers
Rich
Mine's a 96, so a bit different but same principle.
Is it a vent to atmosphere one?
If it is, should have a blanking plug to plug up the recirc pipe.
There will be 3 pipes connected to your DV, One is from the intercooler into the DV, one is a skinny pipe that leads back to your inlet manifold and the other recircs back into your inlet tract.
Connect the new DV to the pipe from the intercooler and the skinny pipe and bung up the pipe that leads away under your intercooler with the bung and hose clip.
Using samco/uprated hoses to and from it is a good idea too, especially if you run high boost.
Think that should be ok.
cheers
Rich
Mine's a 96, so a bit different but same principle.
#5
Scooby Regular
Thread Starter
Join Date: Dec 2001
Location: Herts
Posts: 1,693
Likes: 0
Received 0 Likes
on
0 Posts
Cheers for the help Rich! had a quick go today, but I clearly dont know me **** from me elbow!
Salsa-King has mailed me images now tho so I think i got it sussed!
cheers again m8!
Dave
Salsa-King has mailed me images now tho so I think i got it sussed!
cheers again m8!
Dave
Thread
Thread Starter
Forum
Replies
Last Post
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
oilman
Trader Announcements
15
01 October 2015 11:55 AM
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM