j16jrf

iTrader: (3)

Do the drive shafts out of a 1997 uk car fit the diff off a P1

Or will i have to change driveshafts and hubs too?

hopefully just a straight swap.


Quick answer appreciated guys.


THanks
Jamie

banny sti

iTrader: (68)

You will need to change the driveshafts as the P1 has a plated diff, however you could just get the diff from any sti 3,4,5 or 6 and that will drop straight in with your existing driveshafts.

Banny

j16jrf

iTrader: (3)

so is it just the driveshafts that i need to change or the hubs aswell?

banny sti

iTrader: (68)

Just hubs as the P1 has an R160 diff, which runs the same thickness shafts as your car.

Banny

j16jrf

iTrader: (3)

no apparently the hubs wont be an issue. Just talked to Pennine and they said the hubs will be the same i MAY have to change the drive shafts but MAY be ok just depends really.

So fingers crossed it all goes together nicely

banny sti

iTrader: (68)

Sorry I meant you will not need to change the hubs but the driveshafts will need to be changed as I did the above conversion to my sti 3, before Chy removed it and replaced it with a 6 speed box

Banny

j16jrf

iTrader: (3)

done only thing changed was shafts, well chuffed

cheers for the info mate