98 2.5GT clutch prob's
#1
98 2.5GT clutch prob's
I have a 98 Legacy 2.5GT with about 130K on it. The clutch has been replace at around 90K. I noticed that in the winter time, my clutch has been working fine, but after the warm weather set in, my clutch sticks to the floor. I have trouble shifting it also when it's sticking down to the floor. Works fine when i first start driving, but as i drive for 35 mins or more, i dont get any resistance from it until it's nearly to the ground, then when i let off of it, it only moves 1/2inch back to me until i put my foot under it and pull up a little, then it jumps back up. If i give the car a break and let it sit for half hour or more, works ok, again, not great, but a little bit better until it gets completely cooled off. Could it be that it needs to be bled? Clutch release cylnder/ assembly to release cylnder? any help would be greatly appreciated.
#2
#3
Thank you very much for the quick response! I really appreciate it. Would u happen to know where it's located...i cant seem to find it in the manual. Is it right behind the intake manifold between the engine and firewall? thanks in advance.
Thread
Thread Starter
Forum
Replies
Last Post