Exedy Racing Stage 4 Hyper Twin Plate Clutch
#1
Scooby Regular
Thread Starter
iTrader: (9)
Join Date: May 2006
Location: On MLR
Posts: 1,280
Likes: 0
Received 0 Likes
on
0 Posts
Exedy Racing Stage 4 Hyper Twin Plate Clutch
Has anyone got first hand experience of driving on the road with a Exedy Racing Stage 4 Hyper Twin Plate Clutch & Chrome moly Flywheel. I'm interested in whether the clutch bite point is road user friendly and if the clutch plates chatter when engaging at low RPM.
#2
Former Sponsor
iTrader: (20)
Join Date: Oct 2006
Location: 8.95 @ 168mph. Zero to 1KM 194.1mph
Posts: 1,150
Likes: 0
Received 0 Likes
on
0 Posts
The twin plate clutches are very drivable, with a light peddle, and easy engagement.
They can be a little snatchy for the first few miles, just until they've had a chance to settle.
Because of the design, there is a small rattle when you put the clutch down, but you only hear it if you're stationary.
If you're interested in one, give me a call, PM, or email. I have them in stock.
Mark.
They can be a little snatchy for the first few miles, just until they've had a chance to settle.
Because of the design, there is a small rattle when you put the clutch down, but you only hear it if you're stationary.
If you're interested in one, give me a call, PM, or email. I have them in stock.
Mark.
#3
Will second Marks points... currently have an Exedy twin plate and I was surprised at how drivable they are... Slightly heavier than normal but my other half didnt even notice (till she drove a friends yaris).
#4
Former Sponsor
Join Date: Dec 2005
Location: 10.68 QT mile in 2007 2.33 Type R ** Current 2002 Spec C 2.33 Track prepped.
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
A Small rattle? I would like to hear a loud clutch then.
Its is a great piece of kit and very usable for the road.
Its is a great piece of kit and very usable for the road.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
speedrick
Subaru Parts
0
26 September 2015 03:01 PM