Started getting all the wire organised but I'm struggling to make some sense of the relay connections.
The DCCD ecu is a V4 vintage, but the relay connections it seems are the same for all years.

I have an aftermarket relay, not the Subaru one.

On the diagrams I have the relay from Subaru is like diagram 1 in the pic.
The relay I have is as diagram 2 below.

To which connections on the aftermarket relay do the wires Red/GR/WB/YR go?

Diagram:

Sorry: Relay is the red one in this pic!


I think the Red = '87'
WB = '86'
YR = '87/30' Power in off the fuse box

But not too sure!

Any help please?

Graham.

 

Graham

Terminals 86 & 85 are the solenoid which is the GR, WB on the subaru diagram.
30 & 87 is the switch R & YR

Gary

 

Gary:
Thank you very much indeed!
Graham.

 

As above, except there are two 87's and R / YR is 30 and the Middle 87, not the bottom one. As one is NC and one is NO (normally closed / open)

David

 

Thanks David. I'll sort that out tomorrow, had enough of it today!
(see my project thread for a laugh)
Graham