Rear diff swap
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Feb 2006
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
Rear diff swap
I had a driveshaft snap the other day but it snapped on the spline where it goes in the rear diff, so the spline part was in two halfs, hope that makes sence lol.
I managed to get the rest of the spline out of the diff but I cant get another driveshaft to go in. It seems asthough the splines in the diff have been damaged aswell.
What i was wondering is is it possible to take the crownwheel and pinion out of the damaged diff which is an sti and fit them to a uk diff so the ratios are the sti ones?
on a classic btw
Cheers
I managed to get the rest of the spline out of the diff but I cant get another driveshaft to go in. It seems asthough the splines in the diff have been damaged aswell.
What i was wondering is is it possible to take the crownwheel and pinion out of the damaged diff which is an sti and fit them to a uk diff so the ratios are the sti ones?
on a classic btw
Cheers
Last edited by wrxginge; 01 August 2006 at 06:40 PM.
#2
I do not actually know the answer, but I think the LSD in the Sti diff might not be compatable with the UK diff, but I could be very wrong.
I suggest you call:
www.apiengines.com
or
Alyn at www.asperformance.com
Both ace companies.
good luck.
Graham
I suggest you call:
www.apiengines.com
or
Alyn at www.asperformance.com
Both ace companies.
good luck.
Graham
Thread
Thread Starter
Forum
Replies
Last Post
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM
M4RKG
General Technical
3
30 September 2015 07:51 PM