Gear Stick - too much side to side movement in gear

Subscribe
Jan 16, 2005 | 08:37 PM
  #1  
Can anyone tell me the cure for too much side-to-side movement [lateral slap]with my gear stick. This has now deteriorated to the point where it is making a clicking noise, changing into and out of gear, as well as causing sloppy changes.

Is something loose or worn?

Car is JDM Sti v7 [MY02]
Reply 0
Jan 17, 2005 | 11:12 PM
  #2  
check the return spring on the linkage is still in place underneath the car and whiule youre there check for any excessive wear in the u j 's

hope that helps
Reply 0
Jan 18, 2005 | 08:33 AM
  #3  
probably the dowel pins that secure the linkage to the selector shaft. I have done 3 6 speed boxes now, and they have all had excessive play. New dowel pins cured it, not fully, but to an extent.
Reply 0
Jan 18, 2005 | 08:36 AM
  #4  
Sorry for hijack, steven have you had any problems with 6 speed props not matching rear diff flanges, bolt pattern etc?

Cheers

Rob
Reply 0
Jan 18, 2005 | 08:40 AM
  #5  
Only done 1 with a 6 speed prop Rob, and had no problems matching up to a Uk rear diff from a classic.

Steven
Reply 0
Jan 18, 2005 | 09:15 AM
  #6  
Cheers Steven

R.
Reply 0
Subscribe