Opinions on GGR catted downpipe
#1
Opinions on GGR catted downpipe
I would like your opinion on the Graham Goode downpipe with high flow cat.
Any pics available? (The GGR site has only one poor pic)
Is it 3 inch all the way or 2.5?
Does anyone use it at the moment with a stock ECU?
Does it replace the catted mid-pipe (before the centre section) ?
thank you very much
Any pics available? (The GGR site has only one poor pic)
Is it 3 inch all the way or 2.5?
Does anyone use it at the moment with a stock ECU?
Does it replace the catted mid-pipe (before the centre section) ?
thank you very much
#2
Dimitris
AFAIK it tapers from 3inch at turbo to 2.5 inch where it connects to the centre cat. If you were to get it then you would also need a cat replacement pipe to remove the centre cat to reap the full benefits. I've got the full 3 inch system with sports cat and it certainly helps spool up and torque across the range.
Simon
AFAIK it tapers from 3inch at turbo to 2.5 inch where it connects to the centre cat. If you were to get it then you would also need a cat replacement pipe to remove the centre cat to reap the full benefits. I've got the full 3 inch system with sports cat and it certainly helps spool up and torque across the range.
Simon
#3
Scooby Regular
iTrader: (5)
Join Date: Feb 2003
Location: Worcester
Posts: 2,625
Likes: 0
Received 0 Likes
on
0 Posts
when i asked this question sometime ago, the general view was the quality was not of that of others around and you need the full exhaust as it will not mix and match with others
I went for the tsl sports cat and never looked back
I went for the tsl sports cat and never looked back
#4
thank you for your replies.
I thought that the GGR downpipe was long enough to replace the stock catted mid-pipe.
Does the TSL downpipe replace that part? is it 2.5 inch as well? I hope that I will be able to use it with my blitz nur spec cat-back.
I am also considering the catted H&S downpipe which is 475 pounds.
cheers
I thought that the GGR downpipe was long enough to replace the stock catted mid-pipe.
Does the TSL downpipe replace that part? is it 2.5 inch as well? I hope that I will be able to use it with my blitz nur spec cat-back.
I am also considering the catted H&S downpipe which is 475 pounds.
cheers
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM