Help !!!! changing injectors advice required !
#1
Scooby Regular
Thread Starter
Join Date: Jun 2001
Location: From 208BHP to 311BHP and 12.8sec 1/4mile
Posts: 2,509
Likes: 0
Received 1 Like
on
1 Post
Hi All
Getting my UK MY98 PE Phase 2 ECU remapped soon and have uprated fuel pump, regulator, VF24 turbo and have some Yellow STi 440cc injectors to replace my Grey 380cc injectors. I have ordered an adaptor kit from Pavlo to save changing the fuel rails.
Question ?
Do I need anything else other than the adaptor kit and injectors to replace them ?
Are they a straight swap with the adaptors ?
Cheers
Neal
Getting my UK MY98 PE Phase 2 ECU remapped soon and have uprated fuel pump, regulator, VF24 turbo and have some Yellow STi 440cc injectors to replace my Grey 380cc injectors. I have ordered an adaptor kit from Pavlo to save changing the fuel rails.
Question ?
Do I need anything else other than the adaptor kit and injectors to replace them ?
Are they a straight swap with the adaptors ?
Cheers
Neal
#4
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
I changed my 380s for 550s on Friday and needed nothing extra from Pavlo's adapter kit other than a can of wd40 and a pair of mole grips.. to get the original injectors out!! they were not keen to come out.. the adapter kits are different for the 440's but principle is the same.
I don't think you will need anything other than what comes with Pavlo's kit.. but appologise if the case is otherwise.
JGM
I don't think you will need anything other than what comes with Pavlo's kit.. but appologise if the case is otherwise.
JGM
Thread
Thread Starter
Forum
Replies
Last Post
bustaMOVEs
Subaru Parts
6
06 October 2015 04:42 PM
oilman
Trader Announcements
15
01 October 2015 11:55 AM