Notices
Drivetrain Gearbox, Diffs & Driveshafts etc

I'm no expert - can you help?

Thread Tools
 
Search this Thread
 
Old 09 August 2000, 09:39 PM
  #1  
Tim
Scooby Regular
Thread Starter
 
Tim's Avatar
 
Join Date: Jun 1999
Posts: 181
Likes: 0
Received 0 Likes on 0 Posts
Unhappy

Over the past couple of days I have noticed that occasionally in higher gears at low revs (ie. 4th at 2500rpm), accelerating has hardly any effect, the rev counter just goes in to the turbo then shoots round to the redline with very little drive. When previously it wouldn't matter what gear I was in the car would just pick up and get going as soon as I depressed the accelerator.

My guess is that the clutch is slipping, but the car appears to be reasonably fine pulling away from traffic lights etc..

What do you think? If it is the clutch can anyone recommend a good all round uprated clutch for me (AP?).

94 WRX (71,000 k), not sure if clutch has been replaced before, I'm the first UK owner.

Cheers,

Tim.
Old 09 August 2000, 09:59 PM
  #2  
Stef
Scooby Regular
 
Stef's Avatar
 
Join Date: Jan 2000
Posts: 3,055
Likes: 0
Received 0 Likes on 0 Posts
Post

If the rev needle is shooting round the clock and then dropping back again, it sounds very much like the clutch is slipping.
It is advisable to change it asap as continued use will damage the flywheel.
I have an AP clutch from Scoobymania which performs superbly. Make sure you change the release bearing as well though, as some clutch kits (AP included) don't include it in as standard.
Hope that helps.

Stef.
Old 10 August 2000, 11:52 AM
  #3  
SeanT
Scooby Regular
 
SeanT's Avatar
 
Join Date: May 2000
Posts: 404
Likes: 0
Received 0 Likes on 0 Posts
Post

Recently had the clutch go on my 93WRX and had a Helix clutch fitted, supplied and recommended by scoobysport, the clutch has a good feel under the pedal and bites hard..

hope this helps


Sean
Old 11 August 2000, 07:25 AM
  #4  
rob oneill
Scooby Regular
 
rob oneill's Avatar
 
Join Date: Jun 2000
Location: Runcorn, NW England.
Posts: 1,562
Likes: 0
Received 0 Likes on 0 Posts
Post

Sean,
how much for the clutch and fitting?
Thanks ROB
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
roysc
ScoobyNet General
2
16 September 2015 09:10 AM
The Joshua Tree
Computer & Technology Related
18
11 September 2015 09:24 PM
PeterJ
ScoobyNet General
1
24 July 2001 05:26 PM



Quick Reply: I'm no expert - can you help?



All times are GMT +1. The time now is 12:27 AM.